Pipe Clamp for Woodworking: Are They Good For Woodworking?
The question whether or not pipe clamps are good for woodworking is a common one among woodworkers. There are many opinions on the matter. Some say they aren’t, while others say they are great!
What do you think? Do you agree with other’s opinion? Let us know your thoughts in the comment section below!
Are Pipe Clamps Good For Woodworking?
Pipe clamps are used for many different types of jobs. You can use them to hold up pieces of lumber, boards, nails, screws, etc. If you’re looking for something that will work well on wood and metal then you’ll want to look into using pipe clamps.
You may have heard about the advantages of using pipe clamps over wooden dowels when working with wood. But what exactly does it mean to use pipe clamps over wooden dowel?
The Differences Between a Wooden Dowel and a Pipe Clamp
A wooden dowel is essentially a long, hollowed out piece of wood. They are cut to the desired length and diameter for the job. After they are cut, a wooden dowel is nothing more than a hollow piece of wood.
There is nothing else within the dowel to help prevent it from splitting or cracking. This means you’ll have to be extremely careful while using it or something bad may happen. Using excessive force while installing or removing a wooden dowel from your project could cause it to crack or break.
Wooden dowels are great for non-load bearing parts of a project. However, you should never use a wooden dowel in place of something that is designed to hold weight. This is because they can easily break under the stress.
If you over stress a wooden dowel it could snap in half and cause an injury.
A pipe clamp is made with metal and plastic. The metal is hollow and has the ability to act as a pipe. The plastic is used to cover the metal to give it a sleek look.
Unlike a wooden dowel, a pipe clamp can be used for load bearing parts of a project. It can easily hold weight and distribute that weight evenly across your project.
This is why many woodworkers choose to use pipe clamps over wooden dowels. They are stronger and can be used in many different situations. It’s also easy to find pipe clamps at your local home improvement store or online woodworking store.
What Type of Woodworkers Use Them?
Any woodworker can use a pipe clamp. Whether you’re a hobbyist or a professional, there is always a time and place where you’ll need one. Pipe clamps are great for many different projects and can be used on both metal and wood!
Professional woodworkers use pipe clamps for many different jobs. There are many times when a project requires the use of one or more pipe clamps. Some woodworkers have very specific clamp requirements and others don’t give it a second thought.
It all depends on what type of work they do and how they were taught to do it.
Hobbyist woodworkers also use pipe clamps. Some people say they are only for professional woodworkers, but that isn’t true at all. Most hobbyist woodworkers buy pipe clamps because they find them useful and they can be used on multiple types of projects.
Once you start using pipe clamps on your projects, you’ll quickly learn that they are extremely useful and versatile. You’ll wonder what you did without them!
Where Can I Get Pipe Clamps?
You can find pipe clamps at your local home improvement store. They can easily be found in the plumbing section. If you can’t find them there then check with the help desk.
They should be able to point you in the right direction.
Some woodworkers choose to shop online and opt to buy their pipe clamps online. There are many different options when it comes to buying pipe clamps online. You can shop on brand name sites or independent sites.
No matter where you decide to buy from, make sure they have good reviews and are well-known.
Do They Come In Different Sizes?
Yes, pipe clamps do come in different sizes. Depending on the brand and style of pipe clamp, the max capacity may vary. But the good news is most pipe clamps can be adjusted to fit your project regardless of size!
It’s best to measure your project and then find a pipe clamp size that is close to it. This way you can ensure a proper fit and safety for your project!
Do I Need More Than One?
It really depends on what type of work you do and how many projects you have going on at one time. Some people only need one or two pipe clamps while others may need more.
It’s best to have more than you think you’ll need. This will ensure that you always have the right clamp for every project you work on. Why put off a project or have to stop mid-way through because you don’t have a clamp available?
If you’re just getting into using pipe clamps, it’s best to buy more than you think you’ll need. You can always sell them later or give them to a fellow woodworker if you have extras!
But I Don’t Have a Lot of Space!
Space is always an issue for woodworkers, especially hobbyist woodworkers. Pipe clamps are very easy to store because most of them can be disassembled and the parts stored in a small area. If you’re concerned about space, buy an extra clamp or two, take it (or them) apart and store the pieces individually.
You can also hang them up on the wall. Most pipe clamp brands have holes in the handles for easy hanging. If your project is small enough, you can just hang the handle.
You now know that pipe clamps are very versatile and can be used on many different types of projects. You can use them on small or large projects and they are easy to find. You can also buy them online or at your local home improvement store.
They come in different sizes depending on your project needs. And you can easily store them because of their versatility and ability to be disassembled.
Where Can I Go From Here?
If you think pipe clamps are something you’d like to try, the next step is to go out and get some! If you already have some, the next step is to go out and get more. They’re cheap enough that you should buy several for your workshop.
Just remember to look for good quality and get them from a trusted source. A good quality clamp is always worth the money and will last you a very long time!
And don’t be afraid to branch out. Clamps are just one tool that can be used for more than one job when woodworking. Think outside the box and come up with your own unique ways to use clamps in your projects!
Good Luck & Happy Building!
By: Allen Smith
Sources & references used in this article:
- The formulation of a woodworking studio (DH Kariher – 1974 – scholarworks.rit.edu)
- Taunton’s complete illustrated guide to using woodworking tools (L Bird – 2004 – books.google.com)
- Storage Apparatus for Woodworking Clamps (W Stokes – US Patent App. 12/550,512, 2011 – Google Patents)
- Woodworking-clamp. (JH Lane – US Patent 887,103, 1908 – Google Patents)