Can I vent my furnace out the side of my house?

What is a Gas Furnace Vent?

A gas furnace vent is basically a hole in the floor or ceiling of your home where you place a hosepipe. A gas furnace vent allows hot air from the inside of your home to escape into the outdoors without having to open up windows or doors.

When used properly, it will save energy and money because you don’t have to keep opening up windows or doors when you want to use the heat in your home.

Gas furnaces are very efficient devices that work by burning fuel (wood) at high pressure and temperature. They require a certain amount of space in order to operate correctly so they need to be located away from any combustible materials such as walls, furniture, etc.

To accomplish this, the furnace’s exhaust system must not only be placed far enough away from combustibles but also connected with a proper vent pipe which directs hot air out of the room where the furnace is located.

The following diagram shows the general layout of a typical gas furnace:

In order to get the most out of your furnace, you’ll want to make sure that it is located away from combustibles and connected with a proper vent pipe. There are several different types of gas furnaces available today.

The diagram above shows a typical furnace vent. There are two types of gas furnaces: electric and coal fired.

Electric furnaces do not produce smoke like their coal-fired counterparts, however they still create harmful fumes if improperly maintained. If you live in an area with both electric and natural gas furnaces then you may experience problems with either type of furnace depending on where the appliances are located in your home.

If your home has electric furnaces, you should consider having a separate exhaust system for each furnace. This will ensure that the fumes from one furnace do not interfere with another.

If you do not have enough room to create a second exhaust system, then you may want to drill a hole through your roof and run a pipe to an outside wall.

can I vent my furnace out the side of my house from our website

Do not attempt to share your exhaust with another home unless it is approved by a professional. Although their general layouts may be similar, the location of specific parts can differ slightly.

This article provides a general description of some of the most commonly installed gas furnaces along with illustrations showing how they are located and vented in order to help you get started.

How to Vent a Gas Furnace

The vent pipe for your gas furnace is typically located in the ceiling or on the side of your home. Since it’s necessary to run the pipe outdoors, you’ll want to make sure that it cannot be accessed from the outside.

One of the most common ways this is accomplished is by building a small room around the pipe with a lockable door.

The following photo shows an example of a room built specifically for this purpose:

In this example, the gas company drilled through the foundation and ran the vent pipe through a small hole in the floor. The hole was then sealed with a piece of metal and a lock was installed on the door to provide security.

This method is not the only way to secure your vent pipe, but it should give you an idea of what’s involved. It may also be necessary in some cases to pour a little concrete around the pipe.

The important thing is to make sure that curious young children cannot get inside the room because the connections can be poisonous if ingested.

can I vent my furnace out the side of my house at remodelingmate.com

The next step is to route the vent pipe outdoors. The direction you point this pipe will be somewhat based on your geographical location.

In most cases, you’ll want to face the pipe away from your house or in the direction of the prevailing wind. In some cases, you may be required to install a filter on the vent to prevent soot from clogging the pipe.

The last thing that you need to do is connect the furnace’s exhaust system to the outdoor vent. Be careful when opening the connection because there will be a slight vacuum in the pipe.

Most of these systems use a flexible connector that can be easily disconnected using a wrench. You should also wear protective eyewear when performing this task because some of the fumes are harmful if inhaled.

You may need to adjust the height of your pipe if it’s gaseous emissions are escaping out the top. This can be done by cutting the pipe and adding a short section of PVC or metal to extend it.

(Do not use a hardwood or other material that might create sparks)

Once you have everything assembled, it’s time to go inside and test it. If you’re not completely sure that it’s working correctly, have a professional inspect your work.

You definitely do not want the entire house burning down due to faulty work!

Hope this helps!

Sources & references used in this article: