Can you use casing for chair rail?

How to Install Chair Rail With Wainscotting

The installation of chair rail with wainscotting is very simple. You need only two tools: a hammer and a screwdriver. All you have to do is drill holes through the wainscotting material and then fasten it with screws.

You can use a hammer and screwdriver or you can use a chisel if you are skilled enough. You can also use a drill machine which is attached with screws. It is not important how you do it, but what is important is that you don’t make mistakes.

You can also decide to go with the traditional way of installing chair rail without nails. Drill holes through the wainscotting boards in the areas where you want to fasten it.

Now fasten the wainscotting by screwing it into the wooden framing of wall.

How to Install Chair Rail Inside Corner

Installing chair rail inside a corner is slightly more difficult than installing it only on the wall. But the process is still simple. The traditional way of installing chair rail without nails is very easy.

After you have installed the wainscotting material to your wall, you are ready to proceed with the chair rail molding. All you have to do is drill the holes through the wall at an angle.

Drill holes at the highest point of the inside line of the chair rail and at the lowest point of the outside line.

The first thing you need to do is cut a mitre on the top of the chair rail. A simple miter box is all you need to make this cut. Then fit the miterbox into the angle that you have drilled.

Cut through the wainscotting material. You are now able to fasten the chair rail molding into place.

Installing chair rail inside a corner requires the use of specialized equipment.

How to Install Chair Rail Around a Window

can you use casing for chair rail - remodelingmate.com

Installing chair rail around a window is a little more complicated than chair rail inside corner. The process is almost the same, but there are some differences. If you are a skilled carpenter, you can create this equipment yourself.

If you are not a skilled carpenter, it is better to hire a professional.

moderncarpentryandflooring. The first thing that you have to do is measure the thickness of the wooden framing around your window. When you know the thickness of each layer, you are able to cut the chair rail molding to the right size.

You will need a miter saw for cutting, a beveled edge clamps and a drill.

Once you have all the materials, check the size of your window. Then measure the space between each wooden framing. Cut the chair rail molding to fit into the space between each wooden framing.

The next step is to fasten the chair rail molding to the wooden framing. This is done in the same way as installing chair rail inside corner. Drill at an angle through the chair rail and wooden frame.

Put nails into the holes to fasten the molding into place.

How to Install Chair Rail with Decorative Molding

Installing the chair rail molding is optional. You can decide to leave it without molding. This is up to you and your personal taste.

can you use casing for chair rail - remodelingmate.com

The process of installing chair rail without molding is very similar to the process of installing it with a molding.

When you have decided to use decorative molding, the process is slightly different. You can use any kind of decorative molding you want. Just make sure it is suitable for your home decor.

You can use different kinds of materials such as wood, metal or plastic.

The first thing you have to do is decide on the type of decorative molding that you want. Then cut it to size.

Measure the area that needs to be covered with molding. Cut the molding to size.

Drill holes through the wooden frames and the decorative molding at an angle. Nail it into place.

If you decide that you no longer want to use the decorative molding, you can easily remove it. You can then reinstall new molding or cover the wooden frames with another type of material or wallpaper.

How to Lengthen or Shorten Chair Rail Molding

If you find that your chair rail molding is too short, there is a simple way to make it longer.

can you use casing for chair rail - Picture

Use a hacksaw to cut the molding to the desired length. Cut it at a slant. This will create an edge that can be nailed into place.

To shorten chair rail molding, you have to remove some of the bottom molding. This is done when you reach the proper height. Cut the bottom edge of the molding at an angle.

Then, nail it into place.

This is not a difficult project. Installing chair rail molding is a fairly simple task that just about anyone can do. The tricky part is cutting the molding to fit around corners and window frames.

This can be done with a simple scroll saw or jigsaw.

Just take it one step at a time and you will be fine. Chair rail molding can enhance the appearance of your home while adding value to it as well.

Sources & references used in this article: