How to Clean Bathroom Exhaust Fan Duct?
Do you have any questions or concerns about how to clean bathroom exhaust fan duct? Do not hesitate to ask us! We are here to assist you.
If you have been searching for a solution to your problem, then you are at right place. You may have noticed that there are many different types of exhaust fans available in the market today. Some of them are noisy while others don’t produce much noise at all.
There is no way that one can tell which type of fan will work best for your needs without doing some research first.
The most common reason why people buy new fans is because they want to save money. However, if you really want to make sure that your bathroom exhaust fan doesn’t cause too much noise, then it would be better if you used an old one instead of buying a brand new unit. Old units tend to be quieter than newer ones and they are cheaper as well.
The first thing you need to decide is whether you want to keep the fan running continuously during the day or only when it’s necessary. If you choose continuous operation, then you’ll have to deal with a lot of dust particles coming out from time to time. On the other hand, if you choose only when it’s necessary option, then there won’t be so much dust in circulation and thus less chance of getting sick from breathing in too much dust.
If you are handy enough, then you can always replace the motor of an old exhaust fan instead of buying a new one. Just be sure to switch out the motor before the fan itself dies because it can be more expensive to buy a whole new unit.
When you are replacing or fixing an exhaust fan, always make sure that the duct is intact as well. Cleaning and maintaining your ventilation duct is easier than ever before.
The next thing you need to decide is whether you want the fan to come on at certain intervals or at specific intervals. In other words, do you want the fan to run for a minute and then turn off for five minutes before it repeats again or do you want it to run for ten minutes then rest for thirty minutes before repeating? Of course, you can always choose a different setting if you find that the first one is not working properly for you. If you want to make sure that it is clean and working efficiently, then all you need to do is to hire a professional to take care of the situation for you.
Bathroom Exhaust Cleaning Service
Whether you have a small business or a large one, keeping your bathroom exhaust clean is very important. Since an exhaust system is a closed and contained space, cleaning it yourself can be dangerous. The most common setting that people use is the ten on and thirty off cycle.
This allows the air to flow for extended periods of time without pushing too much air through the ducts. It’s also important to keep in mind that your fan is only as strong as your weakest duct. In other words, if one of your ducts is clogged, then the entire system will back up and the fan won’t run efficiently.
In addition to replacing the filters in your system, it may be necessary to get a professional cleaning as well. While this can be quite expensive, it is necessary if you want to keep your employees and customers safe from breathing in harmful fumes and bacteria. If you have a very large building, then you may need multiple fans installed.
This will allow for better air flow and will also make the cleaning process much faster. This is the reason why it’s important to hire professionals to take care of this.
How to Clean Your Exhaust
For many small businesses with only one bathroom, the exhaust system can become backed up rather quickly, especially if there are a lot of employees using it on a daily basis. It’s really not all that hard to clean these yourself, but you do need to know what you’re doing. Always start from the source and work your way towards the outlet.
Most people don’t think about cleaning their exhaust fan, but it’s an important safety and health issue. Not to mention, a clean fan will function more efficiently which will save you money over the long term. Whether or not you clean your fan on a regular basis is up to you, however if you decide to hire a professional company, then make sure that they are registered and up to date with the latest safety guidelines.
In other words, find where the exhaust enters the bathroom and clean out whatever is clogging it first.
In many cases, there will be hair blocking the individual exhaust vents. For these, you can use either a broom handle or even just your hand to remove the hair. If it’s too clogged to do this, then you may need to disassemble the vent itself.
While a clean exhaust fan is important, what’s even more important is having the right type of fan to begin with. If you have an exhaust fan that goes outside, it’s important to make sure it has a screen over the outside vent. This will prevent insects and small animals from entering your building.
Not to mention, it will keep cold air from coming in during the winter months. This is a little more tricky and if you don’t know what you’re doing, then you could easily make the problem worse.
After cleaning the exhaust vent in the bathroom, you’ll also need to check the fan itself. This is usually located above the door or somewhere nearby. It should be obvious since there will be wiring and a motor attached.
Once again, start from the source and work your way towards the exit.
Next, you need to address the problem of clogged pipes. While this isn’t an issue for most people, it’s something you need to be aware of just in case. Typically, the bathroom exhaust fan runs continuously (even when no one is in there) in order to keep the air moving.
If a lot of hair and other debris gets into the pipes, then the fan won’t be able to do its job properly. If you have long hair, you may want to put it up before doing this. It doesn’t take too long to clean these, but you do need to take your time in order to do a good job and prevent from getting hurt.
Remember the difference between up-flow and down-flow ventilation? For those of you that don’t, up-flow is when the air enters from the floor and exits at the ceiling while down-flow is just the opposite. This is a very rare occurrence, but if it does happen then you need to call a plumber right away.
How to Clean Your Sump Pump
If your home has a sump pump, then it’s your responsibility to make sure it stays clean. Most of the time this isn’t a big deal, however during the spring, fall and winter months, this can be a little more problematic. In most cases, you will want up-flow ventilation in your bathroom so the dirty air from the shower, sink and toilet can easily escape.
However, if you have an exterior vent (such as a wall vent or one in the ceiling), then you need to make sure that it’s a down-draft unit. If not, then the dirty air will simply fill up the room and replace the clean air that’s supposed to be there.
The main part that needs cleaned on a regular basis is what’s called the sump pit. This is where most of the gunk from your house goes, so it tends to get pretty nasty in here. Because this is located underneath your house, it can be a little dangerous to clean.
Just take it slow and be careful, because there may be some small openings for ground water to seep into.
A sump pump is a small pump that is located at the lowest point of your house. This is usually a pit or a shallow hole in the ground (hence what it’s named after). It has a tube connecting it to the bathroom so the dirty air can be expelled outside.
If you ever noticed condensation on the windows in your basement or even a damp or musty smell, then you need to have your sump pump cleaned. You don’t want to fall in.
The first thing you need to do is turn off your sump pump. This is usually done with a switch located somewhere near the pit. After it’s off, remove the lid so you can get to work.
Next, take a shop vacuum and start sucking up all the water and gunk that’s at the bottom.
While this isn’t a very common occurrence, you still need to familiarize yourself with what’s involved in case you ever need to do it. The first thing you want to do is turn off the power to the sump pump at the breaker box. Next, you need to remove anything that’s covering the sump pump and then remove the lid from it.
At this point, you can take a putty knife or flat head screwdriver and start cleaning any debris out of it.
How often do I need to clean it?
If you have a sump pump, then it’s your responsibility to make sure it stays clear of any debris. The best way to do this is by using a shop vacuum and sucking up anything that’s at the bottom. You need to be careful when you’re doing this because there may be some openings where ground water can seep in.
Do I really need a sump pump?
If you’re not draining water away properly, then the answer is yes. Doesn’t matter how good your gutters are or how expensive your French drains are, if you don’t have a sump pump then all of that work is pointless. Not only will you damage your foundation, but you’ll also end up with a house that’s completely unlivable.
Nothing is worse than a wet basement.
What about a water softener?
If you have really hard water, then you may want to look into a water softener. These are much different than the ones that people use for their laundry and are only used for a handful of appliances (such as your washing machine).
If you have well water, then you probably already know that water softeners aren’t a luxury; they’re a necessity.
Not only do they make your clothes softer, but they can also keep away those pesky build ups that are caused by hard water. Most water softeners consist of two tanks, one that is filled with special beads that can effectively remove the impurities from the water and another one that rinses them. A brine tank (usually a plastic container) is also used to mix more beads when necessary.
Sources & references used in this article:
- Ventilation and posture effects on inhalation exposures to volatile cleaning ingredients in a simulated domestic worker cleaning environment (ML Benjamin, S Arnold, M Rao, K Davis, A Maier… – Indoor …, 2020 – Wiley Online Library)
- Quantitative assessment of airborne exposures generated during common cleaning tasks: a pilot study (A Bello, MM Quinn, MJ Perry… – Environmental …, 2010 – ehjournal.biomedcentral.com)
- Ammonia exposure and hazard assessment for selected household cleaning product uses (MJ Fedoruk, R Bronstein, BD Kerger – Journal of Exposure Science & …, 2005 – nature.com)
- Behavioral factors affecting exposure potential for household cleaning products (DC Kovacs, MJ Small, CI Davidson… – Journal of Exposure …, 1997 – researchgate.net)
- … of the hospital environment by methicillin-resistant Staphylococcus aureus (MRSA): a comparison between conventional terminal cleaning and hydrogen peroxide … (GL French, JA Otter, KP Shannon, NMT Adams… – Journal of Hospital …, 2004 – Elsevier)