Do I need a scratch coat on cinder block?

The question is, what kind of surface should I use? What type of finish will it give me? How much does it cost? Do I have any other questions or concerns before deciding to purchase a scratch coat for my new project? Read on to learn all about the topic!

What Is A Scratch Coat For Stone Veneer Wall?

A scratch coat is a type of finish applied over the top of your existing stone veneer wall. It’s used to protect the veneer from scratches and damage caused by normal wear and tear. You’ll see scratch coats used on brick walls, too.

How Does A Scratch Coat Work?

Scratch coats are made up of two parts: a protective layer that protects the veneer and a non-abrasive coating that allows you to work with the material without damaging it. They’re typically applied using a spray gun or roller.

Why Should I Use A Scratch Coat On My New Project?

There are several reasons why you might want to consider using one of these finishes over the traditional paint job. Here are just some of them:

Protection From Damage – If you’ve ever had to repair a damaged piece of veneer, then you know that it takes time and effort to get the old piece back into shape again. Using a scratch coat can help protect the veneer from damage and other potential issues that can occur during the building process.

Long-Lasting Shine – Using a traditional paint job may result in your veneer looking dull and lifeless over time. Using a protective coat on the other hand will ensure it retains that freshly installed gloss for much longer. This means your new stone walls will look great for much longer, which makes it worthwhile.

Affordable – You may think that getting your walls finished in a traditional paint job will be more affordable. This isn’t necessarily the case though. The long-term costs of regular repaints will actually end up being more expensive in the long run. Plus, you won’t have to worry about hiring someone to do any necessary touch-ups over time.

Do I Need To Use A Special Type Of Scratch Coat?

There are many different types of scratch coats for you to choose from. However, not all of them are created equal. You’ll want to make sure that you’re getting a high-quality material that can stand the test of time. Here are some of the factors you’ll want to consider before making your final decision.

Durability – The main thing you’ll want to look for is the overall durability of the scratch coat itself. The best ones can last for up to seven years, which means you won’t have to worry about re-coating your walls anytime soon.

do I need a scratch coat on cinder block | remodelingmate.com

Ease Of Application – You’ll also want to consider how easy it is to actually apply one of these coats. Some require certain types of tools, such as a spray gun. Others, however, can be applied using just a standard roller. The choice is ultimately up to you and your preferences.

Price – You’ll also want to keep price in mind. Some scratch coats can be quite expensive, while others are more reasonably priced. It’s up to you how much you want to spend on this material, but just keep in mind that the most expensive ones tend to be higher in quality.

Do I Need To Do Anything Special To Prep The Surface?

Yes, you will need to do some prep work before you apply the scratch coat. The surface that you’re applying the coat to needs to be cleaned and degreased, then lightly sanded before it can be coated.

That’s because any grease or oil will prevent the new material from adhering to the wall properly. If not, then you run the risk of the coating beginning to peel off and crack after a period of time.

If you don’t own a power sander, then you can just hire someone to do all the prep work for you. Most professionals will charge between $50 and $100, which is well worth the investment to ensure your new coating is applied correctly.

Benefits Of Applying A Scratch Coat To Your Walls

There are several benefits that come with using a scratch coat when remodeling your basement. For one, they can help prevent water damage to your walls. If you’ve ever experienced a flood in your house, then you probably already know how problematic water damage can be.

Water can cause the underlying foundation of your home to rot, which requires extensive repairs in order to remedy the problem. Applying a scratch coat can help protect your walls from such damage since it acts as a sealant of sorts and absorbs any water that comes in contact with it.

Another benefit to this material is that it can also prevent mildew from forming on your walls. One of the worst things about having a basement is the potential for mold and mildew to form if you live in a damp environment. This is because there is limited circulation to the room, which allows moisture to remain on the walls for extended periods of time.

Mold and mildew can cause a variety of health problems, so it’s in your best interest to do everything you can to keep it away. One way to remedy this problem is by applying a scratch coat, which will prevent moisture from settling on the walls in the first place.

Finally, a scratch coat can help protect your basement walls from potential damage. If you ever have an accident where a lot of water is involved, then you’re far less likely to ruin the walls if you’ve applied a scratch coat first.

This type of coating can also help protect your walls from bleeding water stains and other types of unsightly damage as well. It’s definitely worth looking into if you’re worried about damaging your basement’s walls in the future.

do I need a scratch coat on cinder block | remodelingmate.com

Getting Your Basement Ready For A Coat Of Dry Lining

Prepping your basement walls is one of the most important parts of this remodeling project, which is why you should take the time to do it right. If you’ve never worked with dry lining before, then take the time to learn more about it before getting started.

If you’re in a big hurry to get started, then it will be best to hire a professional like EverBrite Restoration to do the job for you. It may cost a bit more money to hire experienced professionals, but it’ll be worth it when they’re done since you won’t have to worry about damaging your home.

Your local restoration company should also be able to give you more tips on how to prep your basement walls as well. You may want to ask them about different types of dry lining as well, since there are several different brands on the market.

One of the more popular choices is Tyvek Homewrap, which comes in 4′ x 25′ rolls and can be purchased at most building supply stores. This type of dry lining is fairly easy to work with and won’t break the bank either, though you may need to buy two rolls for larger areas.

You should also take the time to tape all of your exposed edges with waterproof tape. This step may be a bit tedious, but it’s an important one that can prevent a lot of future problems.

Start by laying your dry lining material flat on the floor and then unrolling it upwards against the wall. You want to make sure it’s completely flat against the walls so there are no bubbles or creases.

When you get to the top of the wall, take your tape and attach it securely to the dry lining and the wall. Your local restoration company can give you specific instructions on how to get the best results with this step.

At this point, you should let the pros take over. If you really want to learn how to do this yourself, then make sure you have all the necessary tools for cutting and shaping the dry lining material before getting started. A basic toolkit like the one included with many newer drills should be more than enough.

do I need a scratch coat on cinder block at remodelingmate.com

Dry lining can be a bit tricky if you don’t have experience with it, so it may be best to let the professionals handle this part of the job unless you really want to learn how to do it yourself.

The Last Coat Of Dry Lining

Now that your basement walls are ready, it’s time to apply the finishing coat of dry lining. The first thing you need to do is cut and shape the dry lining to fit around your basement walls. You may need a second pair of hands for this part of the job, especially if you’re working in a tight area.

After your dry lining is ready to go, unroll it and ensure that it’s completely flat against the wall. If you find any bubbles or creases, then you may need to apply some pressure from behind the material to get rid of them. Most of the time, you can simply lightly tapping the backside with your fist to flatten any bubbles.

Continue doing this until your dry lining is completely flat against the wall. Next, you’ll need to tape the edges with waterproof tape. Attaching the tape may take a little time, but it’s an important step that can help prevent future mold and moisture damage.

Again, your local restoration company can give you more detailed instructions on how to get the best results. Once your dry lining is ready, it’s time to apply the first coat of mud.

Applying The First Coat Of Dry Lining Mud

Before you start taping and mudding, it’s a good idea to test out your mud mixture to ensure that it’s the right consistency. You don’t want it to be too watery since it will take much longer to dry and you may not achieve the proper thickness. On the other hand, if the mud is too thick, it can spoil easily and become too hard to tape.

Start by grabbing a small amount of dry lining mud from your bucket and add a small amount of water. Stir the two together with your hand until you get a consistency that can be easily spread with a taping knife but hasn’t turned to paste. If you need to, you can also add a little more dry lining mud or a little more water as needed.

Next, grab your taping knife and start applying the mud around the perimeter of one of your basement walls. You really don’t need to apply a thick layer since you’ll be going over it several times anyway. Start at the bottom and work your way up in several strokes, gently pressing the knife into the wall to ensure good adhesion.

Once you’ve applied a base coat to one wall, move on to the next and then the next. Try to work as quickly as possible without sacrificing quality. Once you’ve finished your first coat, let it dry for at least eight hours or preferably overnight before applying the second coat. Applying your second coat is very similar to the first.

do I need a scratch coat on cinder block - remodelingmate.com

The Final Coat Of Dry Lining Mud

Your final coat of dry lining mud will be the finishing touch and should make the walls nice and smooth. Again, you’ll want to apply your mud in several thin coats rather than one thick one. Once you’re finished, you should have a nice and even coat of mud around all of your basement walls. Let the mud dry for at least 24 hours before applying dry wall.

Installing Dry Wall

Installing dry wall on your basement walls is very straight forward and doesn’t take too much time. First, starting at the bottom, place a strip of drywall against the bottom of one of your basement walls. Using a flathead screwdriver, gently tap wooden cleats into the studs on the wall every few feet. Make sure that the top of the drywall remains level with the bottom of the floor joists.

Continue installing the rest of your drywall and be sure to apply at least one screw in every foot. If you’re uncertain about your ability to hit a stud, it’s always better to go without. You can always go back and add them later. Your finished product should look something like this:

Installing The Top And Finish

Once your drywall is installed, it’s time to top and tape. Start by cutting a piece of drywall to size so that it fits nicely between two floor joists and then screw it into place with drywall screws. Make sure you leave a couple of inches at the top so that you can later attach your mud so and tape.

Once you’ve installed the top pieces, it’s time to tape and mud. Mud is a mixture of drywall and water which is spread with a taping knife over the seams of drywall where two pieces meet. Start by spreading a nice thick bead of drywall mud over the seam between two pieces of drywall. Next, carefully set another piece directly over the first and press down until the mud spreads over the seam.

Continue in this manner until the entire wall is complete. To create a nice smooth finish, run a long metal taping knife over the entire surface of the drywall to smooth out air bubbles and ensure an even coat of mud. Once your walls are complete, let them dry for at least eight hours before sanding.

The sanding process can be a bit tedious but doesn’t take too much time. Using a power sander and plenty of sandpaper, start at 100 grit and work your way up to 220 grit. Be careful not to rush since a good sanding job is important to a quality finish.

Next, using a small roller and paint tray, cover the wall with a nice even coat of primer. Once that’s dry, cover it with two coats of drywall paint, letting each coat dry for at least eight hours before applying the next coat.

While your paint is drying, you should take this opportunity to make your electrical and lighting preparations. Since you’ll need to drill into your drywall for these purposes, it’s best to wait until the drywall is complete before finalizing your decisions. This will ensure that you don’t end up damaging your brand new drywall!

do I need a scratch coat on cinder block from our website

Installing a Light Fixture

You have a few different options when it comes to installing lighting. The best solution really depends on the layout of your basement and the types of bulbs you intend to use.

Recessed lighting is a good choice in nearly any basement. The installation process is fairly simple. First, find a location for your first light about a foot from the bottom of the wall and mark its location with a piece of tape. Then using a stud finder, locate a stud behind the drywall in this location. Mark its location with a piece of tape as well.

Using a drywall saw, cut a hole about six inches square around the mark. This will allow you ample room to work with the rest of the installation. Take your time and be very careful not to damage any wires that you don’t intend to.

Install your light fixture inside the hole with the screws provided. Next, cut out an access panel using the same process outlined above and then replace your drywall patch.

Sources & references used in this article: