Milwaukee makes a cordless framing nailer, which is available in different models. These include:
Milwaukee M18 Cordless Framing Nailer – $1,299.00
The Milwaukee M18 is a high quality corded model with a wide range of features including:
• Cordless operation • High performance motor • Easy to use controls • Compact design • Large capacity (4.0Ah) battery pack
The M18 is an excellent cordless nailer. It is very easy to use and has a large capacity battery. The tool is also very well balanced.
The one area where cordless framing nailers are currently lacking is the depth of their magazine. The M18 has a below average size of magazine for this type of tool.
The M18 is a great cordless framing nailer if you already have a lot of M18 batteries and battery packs. If you are starting from scratch, you would do well to consider a P260 instead.
Milwaukee P260 26 Degree Full Round Head Framing Nailer – $520.00
The Milwaukee P260 is a very dependable cordless model with a full round head. It is easy to use and has a durable all metal design. This is a great cordless framing nailer for users who are starting out or do not plan on using one every day.
The P260 is a good tool, but it is on the heavier side. It also has a comparatively small battery that will need to be recharged or replaced after only 100 – 120 nails. The tool itself also has a small capacity magazine.
The P260 is a good cordless framing nailer if you do not plan on using it all day, every day. If you need something more heavy duty, you are going to need to step up to a M18.
Milwaukee M18 26 Degree Full Round Head Framing Nailer – $599.00
The M18 is probably the best cordless model that Milwaukee makes for home users. It has everything you need to get the job done with a great combination of power, features, and battery life. The one major benefit that it has over its P260 sibling is its superior battery life.
You can drive several thousand nails on a single charge.
The M18 is not without its flaws. The design of the magazine is not great and can cause jams. The exhaust can also get very hot, which can cause burns.
The M18 is the best cordless framing nailer if you need something with a lot of battery life.
M12 26 Degree Full Round Head Framing Nailer – $499.00
The M12 is by far the most affordable cordless model that Milwaukee makes. It is also the lightest, quietest, and most compact. This tool is very easy to use and great for DIYers who only need to use a framing nailer occasionally.
The M12 is a good tool, but it has some drawbacks. It doesn’t have great balance and the battery life isn’t all that great.
The M12 is a great choice if you only need a framing nailer occasionally. It isn’t a great choice if you plan on doing a lot of work.
Does Milwaukee Make A Cordless Framing Nailer?
Milwaukee does make a cordless framing nailer. They make several models, each with different features and abilities. Their tools are known for their high quality and performance.
How Does A Framing Nailer Work?
A framing nailer works by firing a metal pin or nail with a plastic or metal head. These pins or nails are kept in a magazine on the tool and are driven directly into wood with a great deal of force.
Framing nailers are very useful in building and construction. They can be used to put together the frame of a house or even to attach boards to said frame.
These tools are often pneumatically driven but they can also be electrically driven. Pneumatic framing nailers are more common, but there are more available electrically driven models on the market currently.
Pneumatic Framing Nailers
Pneumatic framing nailers use compressed air to fire nails. They require a hose and a compressor along with the tool itself to operate. You have to plug the hose into the compressor and the other end into the gun.
Pneumatic nailers fire a wide variety of nails from small pins to large framing nails. Their capacity is dependent on the size of the magazine. The average capacity is between 70 and 140 nails.
This gives you enough for most projects without having to constantly refill.
These tools are very durable, simple to use, and easy to maintain. They are also very powerful. They can drive a wide variety of nails into a huge variety of materials.
Over time, they can become dirty and their seals can wear out. If you want to keep your nailer working well, you should lubricate it and clean the air passages out periodically.
Electric nail guns are often a better choice for people who do smaller projects at a time. They don’t require the expense and bulk of a compressor and air tank. Instead, they use a battery to power the tool.
The battery is then connected to a reducing valve that changes the high pressure air coming out of the battery down to a lower pressure that drives the tool. This produces an efficient way to operate the tool without all of the bulk and weight that a compressor would add to the tool.
The downsides to an electric framing nailer are the battery life and the availability of battery packs when you are out in the field. If your battery dies then you can’t use your framing nailer. Some people choose to carry a spare battery with them, but this adds even more weight to your tool belt.
Another issue is that the battery life isn’t as long when the battery is cold. For people who work in colder climates, this can be a big issue. You might need to stop and wait for your battery to warm up before you can continue working.
There are a few different types of batteries in use for cordless tools. There are the older type batteries like you find in a car. Then there are the newer lithium-ion batteries that have become popular.
Each type has its pros and cons.
Car batteries are cheaper than the newer types, but they have some major flaws. They aren’t as lightweight and can spill acid, which could cause a serious injury. They also don’t hold a charge as well in the cold.
If you are going to use a traditional lead acid type battery, you should get an AGM version. This stands for “absorbed glass mat”. This type of battery doesn’t have a liquid inside, which makes it much safer if it is broken.
Lithium-ion batteries are the newest type of battery technology. They hold a charge much better in the cold and they don’t have the weight of a traditional battery. Some brands claim that their batteries last 5 times longer than traditional ones.
Their only real downsides are that they are more expensive and can be dangerous if they are damaged. If you use a lithium-ion battery, make sure that you have a way to check its charge level and take care not to bang it up too much.
Now that you have your battery and battery charger, you need a way to carry all of your stuff. Your best bet is to get a good tool belt. This will help you organize the tools that you need and take the strain off of your hands.
You can get a tool belt that is just big enough to hold what you need, or you can get one that has several pockets and pouches on it. Some people even customize their tool belt to hold everything just the way that they like.
Electric or Pneumatic
Framing nailers can be electric or pneumatic. Electric nailers are powered by an internal battery that is recharged with a charger. These don’t require compressed air, just electricity.
They are significantly lighter than a pneumatic nailer and are less expensive as well. However, they have limited battery life and need to be recharged.
Pneumatic nailers use compressed air to shoot the nails from the tool. These are heavier than electric models but they don’t require an electrical outlet to be nearby. They also are much faster than an equivalent electric framing nailer.
They require that you have a hose to a air compressor, which can be quite a bit heavier than a tool belt with batteries in it. Compressed air can also become dirty and wet, so the air coming from the hose can damage your project if you aren’t using a water-sealed air compressor.
If you are using a cordless nailer, your battery is only good for about 5,000 shots. That may sound like a lot, but it isn’t. A single project can use up around 1,000 nails.
That means that you will need to reload your gun 4 times for every single project. You may have to stop work to reload your gun during bigger projects too. This can slow you down quite a bit.
With a pneumatic air compressor, you can shoot hundreds of nails per minute. This can significantly speed up your project and you aren’t going to run out of power during a big job.
Your choice of framing nailers depends on what you are using it for. If you are doing smaller jobs that don’t require as much time, an electric framing nailer is a fine choice. If you are doing larger projects that take a lot of time, get yourself a good pneumatic framing nailer.
Read our full Review of the best cordless nailers.
Safety gear is an important part of any job. This is even more true if you are working at heights or with power tools.
Even if you take every possible precaution, accidents can happen. It is important that you are prepared should something unexpected take place.
Safety glasses are a must while working. No matter what type of job you are doing, you should have a good pair of safety glasses.
These should be made of some sort of durable material such as metal or plastic. Your safety glasses should completely cover your eyes and cheeks.
Make sure that the sides of the glasses fit snugly against your face. This will keep any sawdust or woodchips from getting into your eyes.
If you are using a chainsaw, it is also important that you wear ear protection. Wood is very noisy when it is being cut and prolonged exposure to these noises can cause hearing damage.
You should also wear safety glasses when using a table saw or any other power tool for that matter. Flying wood chips and bits can cause serious eye injuries.
It is also important that your glasses have some sort of rating on the lenses. Most safety glasses have a “G” rating, which measures the glasses’ resistance to particles. The higher the number, the better the protection.
It is important to keep your safety glasses in good condition. This is so they will protect you properly if you need them to. It is also important to remember to clean and store your safety glasses when you are finished working.
If you are using any other power tool, it is important that you wear all of the required safety equipment. This includes gloves, ear protection, long sleeves, etc.
You may be wondering why some of this stuff isn’t already included with the tool you are using. The reason for this is that most of the stuff you are supposed to wear when working at a construction site is specialized and not intended for extended use.
This stuff can get pretty expensive really fast. For this reason, most people just work without it.
Sources & references used in this article:
- Characterization and Evaluation of Cordless Nailer Performance for Liquid and Gaseous Fuels (M Carioscio – 2018 – epublications.marquette.edu)
- Electronic control of a cordless fastening tool (MF Cannaliato, TW French Jr, CS Pedicini… – US Patent …, 2005 – Google Patents)
- Power tool with light (B Palm – US Patent 5,169,225, 1992 – Google Patents)
- Pneumatic nailer (R Butzen, G Meyer, R Jungmann… – US Patent App. 10 …, 2005 – Google Patents)
- Inertial fan for power tool (MR Bailey, W Didier – US Patent App. 16/376,513, 2019 – Google Patents)
- Gun rack (JK Ehmke, JJ Krueger – US Patent 4,579,263, 1986 – Google Patents)
- Motor mount for a power tool (ST Kehoe, B Ludy, TC Thorson, M Naughton – US Patent 9,221,112, 2015 – Google Patents)
- Battery cell module and battery pack (TW Didier – US Patent App. 16/573,649, 2020 – Google Patents)