Flashing is a type of decorative trim or wallpaper which consists of small pieces of metal, plastic or other materials attached to the siding with nails, screws or staples. These are often placed above the floor joists (or underneath them) and are used to give a certain look to walls, ceilings and floors. Some examples include:
• Wallpaper – A piece of wallpaper may have some kind of pattern printed on it. You might see these patterns as stripes, dots, flowers or anything else you like.
• Flooring – There are many different kinds of flooring products available. One example would be tile flooring.
These tiles could come in various colors such as white, black, red and so on. If you want to use one of those colors on your home’s ceiling then you need to first decide what color you want it to be before purchasing the product. Then when you place the flooring over the desired area, you will get a matching effect.
• Ceiling Fans – These fans can be made out of any material and they usually come in different sizes. They are typically used to blow air across rooms or areas where there is no natural airflow.
When installed properly, they create a cool breeze inside the room or even outdoors if the weather is warm enough.
• Ceiling Fans – These are usually made from PVC pipes filled with air. They are sometimes covered with fabric to make them look more attractive.
You might think that these fans will only work if they’re hooked up to a battery, but they actually work even when not connected to any power source. The fan works by using the force of airflow through the pipe and pushing air outwards along its length.
The term “flashing”
Sometimes you can also see flashing on unfinished ceilings. These kinds of flashing come in many different forms and they are mainly used for decoration.
The concept of flashing is not unique to just pieces of wallpapers or other materials meant for floors or ceilings. It can also be applied to siding as well.
This means that if you decided to do some home improvements, you can use flashing for siding as well. is usually used to refer to when someone is protecting an area that is susceptible to water damage. The most common places where you would see this term in use are underneath the roof, around doors and windows and anywhere underneath decks or patio covers.
If left unprotected these areas can become damaged over time as rain water is allowed to seep into the wood. If this happens then it usually means that you will need to make a claim on your insurance in order to get the issue fixed.
Doing so will add some flair to your home’s exterior and it can also make it look better than it did before.
The process is relatively easy and you don’t need to be an expert in construction in order to do it right. You just need some basic knowledge on how materials are installed, a few tools that can cut through various types of materials and most importantly, the courage to start working on your house.
If you have a termite infestation, then it can make the damage even worse.
The use of flashing is usually combined with the use of caulk and/or roofing cement. These materials are usually painted in order to get a smooth finish.
If you are planning on building an outdoor deck then you will need to use flashing around the areas where the joists meet the ground. This is important because it prevents moisture from being trapped underneath the deck. This can cause rotting to occur and then the deck will start to become unstable. The rotting process can also be sped up if there are any insects such as termites in the area.
If you notice any of these issues occurring on your house, then you should immediately call an exterminator in order to get rid of them as soon as possible before they become a bigger problem in the future. If you fail to do this then water can seep underneath the deck and it will cause it to become weak and could cause damage to your home as well.
When you are installing flashing around the perimeter of your house, make sure that you cut it to size before applying it. This will help to ensure that you are able to put it in the right area without wasting any of it.
The process of installing flashing starts by cutting a 45-degree bevel along the bottom side of each piece.
You should hold it up against the bottom side of your house so that you can get an idea of where you need to place it. Make sure that you are leaving some room around the outside edge in order to prevent any water from pooling against it.
The next step is to use metal staples in order to secure the flashing to the house itself.
You will need to place a staple every couple of inches in order to keep it from being blown away in the wind. Continue this process until you have completely covered the bottom side of your house.
The next step is to fill in the open gaps between the bottom side of your house and the ground by using caulk or roofing cement.
You can also choose to put screen over the openings instead if you want. Make sure that you are only using these materials on the bottom side of your house because they will cause Issues if you put them on the walls or the top of the house.
This is because water could then pool against it and seep through to the wooden walls of your structure.
The last step involves painting the flashing in order to ensure that it blends in with the rest of your home. If you don’t do this then it will stand out and ruin the aesthetics of your house.
Once you have finished installing flashing and painting it, then you should be good for a couple of years at least. Flashing isn’t something that you are going to have to worry about on a weekly or monthly basis.
You also won’t have to replace it because wind or rain will usually not be strong enough to cause it to fail. However, if you do see that it has been damaged in some way then you will need to get it fixed in order to prevent water from seeping in.
This is something that can be done during the summer when you aren’t dealing with the snow and ice. In fact, the worst thing that could happen is a tree branch falling on it because they are both made of metal.
This could easily cause punctures in the flashing which would then allow water to get in behind it.
You could also damage the flashing if you were to have a fire. This is because the firemen would be shooting water at it in order to put out the fire.
If they were to shoot at the wrong angle then they could easily cause a hole in the flashing. This means that you will have to replace it, and you’ll need to make sure that you install a new one after they are done putting out the fire.
Sources & references used in this article:
- Outside corner post protector and repair device for siding (C Doucet – US Patent App. 10/347,961, 2003 – Google Patents)
- Double coverage roof wall flashing with cavity (JE Folkersen, BJ Folkersen – US Patent App. 16/355,270, 2019 – Google Patents)
- SECTION 07 25 00 WEATHER BARRIERS (BS Tape, C Flashing, D Fasteners – Citeseer)
- Rain-Screen Walls: a Better Way to Install Siding (M AVERILLSNYDER – 2001 – 18.104.22.168)
- Lake Metroparks (A NO – Bid, 2019 – lakemetroparks.com)
- A Case Study of Construction Challenges and Solutions: Installation of Exterior Insulation and Finish System (EIFS) to an Existing Residential Structure (T Viness – Exterior Insulation and Finish Systems (EIFS) …, 2016 – astm.org)