How do I keep water out of my basement stairs?

Basement Walkout Stair Drainage: How To Keep Water Out Of Your Basement Steps?

In this article we will discuss about basement walkout stairs drainage. In the last few years there have been many reports of basement steps leaking or becoming blocked with debris. There are several reasons why your basement steps may become clogged with debris such as:

1) You did not properly clean the concrete before installing them.

2) You installed the steps incorrectly. (For example, they were too steep.)

3) You did not install the steps correctly. (The step was placed improperly.)

There are two types of basement walkout stairs drainage: 1) Awning Over Stairs and 2) Cover Understairs Stairway Drainage. Both methods work well for keeping water out of your basement stairs. However, if you choose to use awning over stairs then make sure that it is strong enough to support the weight of the awning. If you choose to use cover under stairs then make sure that it is strong enough to prevent any water from getting into your basement.

Awning Over Stairs: How To Build A Roof Over Your Basement Walkout Stair Drainage?

Awning Over Stairs: Awning over stairs are usually made from wood or metal. They are attached to the wall using screws. These awnings prevent water from getting into the basement. However, if you have a leaky pipe in your home, then these awnings won’t solve the problem because water will still get inside your house through other leaks.

First, you need to decide if you will use deck blocks or a beam to support the awning. If you have previously installed vinyl flooring on your basement floor then we strongly recommend that you use deck blocks to support the awning. If you do not have vinyl flooring then we suggest that you use a beam to support the awning. You can use an angle-iron or metal tube (available at any lumber yard) to make the beam.

1) Install Deck Blocks: If you decide to use deck blocks then place them every 2 feet along the walls. If the beam is going to be longer than 7 feet then install a second beam and place deck blocks in between the beams.

how do I keep water out of my basement stairs - Image

2) Drill Holes: Use a drill to drill holes that are ¼ inches in diameter in the center of each deck block. The holes should go through the center of the block. The length of the beam will depend on the size of your walkout basement stairs. Next, you need to dig holes where you want to place the deck blocks or beam. After that, fill the holes with concrete and let it dry.

If you’re using a beam then make sure to use metal connectors to support it. Finally, fit the beam or deck blocks through the awning so that it is resting on the wall behind your stairs.

3) Install Pipes: Use a metal tubing that is ½ inch in diameter and 24 inches in length. Place one end of the pipe in the block and use a concrete drill to make it ¼ inches in diameter. This will allow the pipe to fit snuggly in the block. Repeat this process until all deck blocks have a pipe in them.

Cover Understairs Stairway Drainage: How To Prevent Water From Getting Into Your Basement Stairs Drainage?

Cover Understairs Stairway Drainage: Cover under stairs can be made from plywood or metal. They are placed over the hole that goes into the floor of your basement stairs. They are installed using hinges so they can be easily removed when you want to use the stairs.

Cover Understairs Stairway Drainage: How To Keep Water From Entering Your Basement Walkout Stairs?

The cover under stairs drainage system is a good way of keeping water from getting into your basement walkout stairs. It is relatively easy to make and it is also very cheap. This type of drain covers the entire stairwell, except for an opening at the bottom. You can then connect this opening to a sump pump or a French drain.

First, you need to determine the size of cover you will need to fit your walkout basement stairs. Measure the width and length of the hole. The cover needs to be slightly bigger so that it fits tightly inside the hole. Next, measure the height of the cover. It should be at least 6 inches high.

This is important because the water needs to flow over the cover into the pipes.

how do I keep water out of my basement stairs on remodelingmate.com

Saw-Horse Cover: You can make a saw-horse cover by using two pieces of plywood and attaching them to four saw-horses. This type of cover is strong and it is easy to take apart when you want to use your basement stairs.

Metal Flap: A metal flap is another way of keeping water from getting into your basement walkout stairs. It is made by attaching galvanized metal sheet to a plywood base. If the cover is lower than this then the water may leak into your basement.

Cover Understairs Stairway Drainage: How To Install It?

If you want to install a metal cover, then you need to purchase a piece of metal that is the correct size. You can have a machine shop slice and bend it for you. Or you can try and do it yourself with a metal cutting blade for the saw and a hand brake. This type of cover is very strong and it can also be taken apart when you want to use your basement stairs.

Metal Door: You can buy a metal door with a frame from a home improvement store and have it cut to fit your stairwell. Then, you can attach hinges so that the door can be opened when you want to use the stairs. It is easier to make a metal cover if you have the proper tools.

If you are going to make a wooden cover, then you need to build a base out of wood and attach the plywood on top of it. Next, use wood screws to secure the cover to the base. You need to make sure that the cover is the right size before you begin attaching it. This will ensure that it fits tightly inside your basement stairs hole.

Cover Under Stairs: How To Install A New One?

If you need to make a new cover, then you should follow these steps.

Measure the size of the hole that goes into your basement stairs. Measure the height and width of it. Cut the wood or metal to fit inside the hole. Drill holes in the wood or metal for screws so that you can secure it to the floor of your basement stairs.

How To Install It

You need to begin by blocking off your basement stairs so that no one can go down them. Next, take out the screws that are holding the base of your stairs to your house and remove the base. You then need to dig a hole into the ground to a depth of about 6 feet. The diameter needs to be about the same size as the hole in your basement stairs.

Cover Under Stairs: How To Maintain It?

how do I keep water out of my basement stairs - remodelingmate.com

You need to make sure that the cover is still fit properly inside the hole. Check it at least once a year to see if any water has leaked in and caused the wood or metal to warp. If this has happened, then you need to take the cover apart and re-secure it.

You can put concrete in the bottom of the hole to ensure that the cover stays in place. If you are using a metal cover, then you need to use a machine shop to slice and bend a piece of metal to fit your needs. You can have it cut so that it fits over top of your hole tightly and screws can be used to secure it into place.

Cover Understairs Stairway: Take Precautions!

If you don’t take the time to cover up your basement stairs then rainwater or other water can easily flow down into your basement. If this water is contaminated, then it can seep into your home and make you sick. It could also cause mold or mildew to grow in your home which is very harmful to your health.

A cover will keep this water out and ensure that you don’t have to deal with a mess later on. It will also keep pests such as bugs or small animals from creeping down into your basement. This means you won’t have to worry about them getting into your food stockpile or making a nest in your basement.

Sources & references used in this article: