How do you calibrate a Ridgid table saw?


Table Saw Blade Adjustment: How To Calibrate A Ridgid Table Saw?

There are many different types of tablesaws available today. Some have adjustable fences while others don’t. There are even some models with no adjustments at all! So what makes one type better than another? Well, it depends on your needs and budget.

The Ridgid Ridgid Table Saw Family of Table Saws

For years, Ridgid has been known for their quality table saws. They’ve always had a reputation for being reliable and durable. But now they’re expanding into other products too. Their new line of table saws include the Ridgid R4513, R4515, R4517, and the Ridgid R4610.

These new saws are designed to address some of the shortcomings of their older models.

What’s New With Ridgid Table Saws?

So what’s changed? What features did Ridgid add or remove from their table saw families? Let’s take a look.

The R4513 is a small table saw with a 1/2″ thick steel blade and 3/8″ wide teeth. These new table saws feature a variety of features such as aluminum construction, dust collection systems, and more.

Nowadays there’s not much difference between the various Ridgid table saws. All of them use the same basic design. However, there are some differences in terms of blade angle settings and fence angles. For example, the Ridgid R4513 uses a 45° blade angle whereas the Ridgid R4516 uses a 60° blade angle.

It’s a lightweight saw, so it’s easy to transport from one job to another. However, it’s not really ideal for large jobsites like framing houses. This model doesn’t come with an onboard storage system. But it does have a foldable stand. So you can easily store it out of the way when you’re not using it.

The R4515 is the middle child of the family. It has a 5/8″ thick blade and 1/2″ Both have their advantages and disadvantages, but for the most part you’ll be safe with either one.

On a side note: If you’re looking for a contractor-grade table saw that uses a 52° blade angle, you might want to check out the Craftsman 21533. It’s got a nice 3HP motor and it’s comparable to the Ridgid R4516 in many ways.

how do you calibrate a Ridgid table saw |

The R4517 is the big brother of the family. It has a 3hp motor and it’s ideal for ripping through large pieces of stock. In fact, it can handle some of the biggest logs you’ll ever come across. So if you do a lot of work with massive timbers, then you should definitely consider going with this model.

The R4610 is the oddball of the family. Although it doesn’t have an onboard storage system either, it does have a foldable stand just like the R4513.

Now let’s talk about the R4517. It’s Ridgid’s big boy in this new line of table saws. It’s got a powerful 5HP motor and uses a 72° blade angle. While this particular saw has been getting rave reviews from users, it might be a bit too much for the average DIY’er.

It’s got a massive 10″ blade and it’s ideal for fast material removal. So if you’re a professional carpenter who needs to mill lumber on a daily basis, then this is the table saw for you. Just make sure you’ve got strong arms because this thing can become quite heavy after prolonged use. It’s heavy and bulky. It doesn’t have onboard storage or a foldable stand, so it’s going to take up a lot of space in your garage. However, it does have a mobile base you can buy separately, which will make it easier to transport from place to place.

All of the new table saws have some nice safety features. They all come with riving knives and anti-kickback pawls. All of the major components are also easily accessible for routine maintenance.

Now let’s talk about the differences in fence systems, starting with the R4513. This saw uses a standard aluminum fence with multiple position stops. It can lock into place at 90° and it can be loosened or completely removed when the need arises. The R4515 uses a similar design.

However, this one has been reinforced with steel for added sturdiness. Plus, these saws have upgraded fences which can be used to execute dado cuts, miter cuts, and more. They’re also all compatible with the same optional wing and outfeed tables. You can find these tables online for relatively cheap. So if you think you’ll need them for your particular project, then go ahead and buy them.

One of the best features on all of the new table saws is the built-in storage unit. The R4516 uses a hybrid system. It has a steel fence with multiple position stops. But it can be easily swapped out for a traditional rolling aluminum fence.

The Craftsman 215533 uses the traditional Craftsman sliding aluminum fence. And finally, the R4517 uses the same hybrid system as the R4516. It’s located on the left side of the machine and it can be folded out of the way when you need full access to the table. It has six convenient slots and each one can hold up to a 5lb bar. So whether you’re storing your push stick, your featherboard, or even your miter gauge, everything has a designated spot. Plus, since all of these items are located within reach, there’s no chance you’ll accidentally misplace them.

When all is said and done, the Craftsman and Ridgid table saws are solid options. But if I had to pick just one, it would hands down be the R4516. It’s got everything you need and not a whole lot of stuff that you don’t need. I also like the idea of having the traditional sliding aluminum fence.

Now let’s talk about blade changes. The R4516 and the R4517 both use a tool-less blade clamp. Just line up the red dots and push down on the lever to release or secure the blade. The Craftsman 215533 uses a traditional knob to tighten the clamp.

Although it doesn’t have the quick release feature, this clamp is exceptionally durable and it will literally last forever. Just make sure that you don’t lose your allen wrench though. Because it’s not something you can just run out and buy at your local hardware store.

All three of these saws have great warranties, but the Craftsman has the best coverage. It comes with a three year warranty, which is more than double the lifetime coverage of Ridgid’s and Craftsman’s. Ridgid falls right in the middle with five years for the motor and one year for everything else.

how do you calibrate a Ridgid table saw at

Now let’s talk about blade storage. The Craftsman 215533 has a permanent blade guard with a blade storage compartment directly behind it. The R4516 and the R4517 both use a fold-down door to cover the blade. This is convenient for making quick cuts that don’t require the full support of the table.

Craftsman has just a one year warranty for everything. But if you were to get the extended plan, it would match that of the Ridgid. So your choice there is whether you want a longer motor warranty or slightly better coverage overall.

Let’s wrap this up with a quick recap. The Craftsman 215533 is ideal for the DIYer. It’s easy to transport and it arrives almost fully assembled. The only minor difference between the two designs is the location of the hold-down clamp.

On the R4516 it’s located on the right side of the blade and on the R4517 it’s located on the left. Just remember which one you prefer and set all your new blades up that way.

Alright, there are a few other differences between these saws, but I think I’ve covered the major ones. It’s also good if you need the expandable feature since it accepts a wide range of accessories. It’s got a large work surface and the top is solid and smooth. It has the best warranty of the bunch and it even comes with a built-in storage unit.

The Ridgid R4516 is ideal for the serious home hobbyist or the occasional woodworker. It’s easy to set up and more than capable of tackling any project you throw at it. So if you want to learn more about them, then go look them up online or stop by your local home improvement store. The associates there are very knowledgeable and they can help you figure out which saw is best for you.

But right now I’m going to tell you about my own experience with these three models. And these stories are going to remain PG-13, so if you’re not old enough to listen to them, then you had better hit the road jack. It has a good warranty and is affordably priced.

The R4517 is only ideal for the serious home hobbyist or the occasional woodworker. It’s also easy to set up and more than capable of tackling any project you throw at it. It’s got a good warranty and is affordably priced.

So there you have it folks!

I’ve owned both the Craftsman and the Ridgid portable table saws. Actually I bought a pair of them at the same time and set them up right next to each other. The only one I didn’t try was the 4500 because it’s a little too expensive for me. But I liked my Craftsman just fine and I ended up giving it to my sister when I bought my new R4516.

It’s still there in her garage and it gets plenty of use.

how do you calibrate a Ridgid table saw on

As I said, I own a R4516 now and have had it for quite some time now. It’s the only portable table saw I’ve ever owned or even used, so I can’t really give you a good comparison except to say it’s solidly built, easy to set up and take down, and very accurate.

It has a few minor issues that are worth mentioning though. It works for her and I bet it would work for a lot of other people too. The Craftsman is an older model that’s been discontinued, but if you can find one at a garage sale or on craigslist then go for it. But I think the newer 4590 is just as good and much cheaper too.

It doesn’t have a miter gauge, but the good thing is that you can use them from your old Craftsman or DeWalt miter saws. You just have to buy an adapter since it has a different size slot and they aren’t that expensive.

The blade guard has some slight wobble to it when it’s attached. No big deal, but it can get kind of annoying.

And lastly it’s a little louder than my other power tools.

It’s the perfect saw for a weekend warrior who just wants something to cut straight and true every once in awhile.

Ridgid makes a few different models, so you’re going to have to do a little research on your own. But as far as I know they’re all fairly easy to set up and use. And more importantly, they’re all very affordable. The R4516 is actually pretty quiet for as big as it is, but it’s still louder than my Band Saw or Random Orbital Sander.

Okay, so the Craftsman was a little disappointing in some ways, but the winner here is still the R4516 hands down. I’ve never had any problems with it and it does everything I need and more.

As I’m sure you all know, there are more expensive saws out there with a lot of bells and whistles, but why bother? Those things are for people who either have the money to burn or have a business where they constantly need to cut straight true every day in a factory setting.

The R4516 was perfect for my needs and I’ve had it for several years now and don’t see myself getting rid of it anytime soon. My only complaint is that the blade wiggles slightly from side to side. I don’t know if that’s a defect or if all of them are like that, but it annoys me sometimes.

how do you calibrate a Ridgid table saw -

But other than that, it’s perfect especially for the price. You can’t even buy the base model 4500 for that price!

So if you’re looking for a saw in this price range then you really can’t go wrong with the R4516.

Now as for you folks, you’re in a different boat. For one, your shop is only 24″ wide and I think the smallest Ridgid portable is 36″. So that’s going to limit your options right there.

But even with a wider opening you’re still going to have the same problem. Those big bad boy saws are just too big and unwieldy to use on a regular basis.

Just make sure you get the model with the stand!

You see folks, I erred when I first got into woodworking because I didn’t get the stand right away. Big mistake! You might not think it’s that big of a deal since the saw itself only weighs about 75 pounds or so, but after a 10 hour day your arms, back and shoulders will feel it in a bad way.

So do yourself a favor and fork out the extra $100 for the stand. It’s well worth it!

Also, get yourself a good Project Pack. This is something you really don’t want to cheap out on.

I hate going to Home Depot or Lowes because there is always so much clutter around that I never know what I’m looking at. Even their online version is cluttered with ads and promo crap that I don’t need when all I want is a freakin list of their supplies!

So I did some googling and found one that I actually like. It’s simple and to the point. Just how I like it. I never thought I’d use something like this, but it has come in pretty handy so far.

Sources & references used in this article: