How To Clean Exhaust Fan Without Removing It?
The following are some tips which will help you to clean your exhaust fan without removing it:
1) Remove the metal shield from the top of the intake vent. You can use a screwdriver or even a knife if you have one handy. Be careful not to scratch the aluminum surface of the vent!
2) Use a wire brush with mild abrasive cleaner (like Dawn dishwashing liquid). Do not use harsh cleaners like dish soap or detergent because they may damage the aluminum surface of the vent.
3) Take off any dust particles that might be stuck inside the vents. If possible, try to avoid using a vacuum cleaner since it could cause damage to the vent.
4) Try to keep all parts of the fan in good condition so that you don’t need to replace them later when needed.
5) Always make sure that the fan blade is clean before replacing it. Some types of fans have two blades while others have three blades. Make sure that the new blade fits properly into the hole in order to prevent rusting down.
How To Clean Kitchen Exhaust Fan Motor?
5) Cleaning the fan’s blades is very easy. Just take off the blade cover and wipe down the blades with a soft cloth. The same principle applies to cleaning the fan’s motor.
6) For cleaning exhaust fans’ ducts, you can either use a vacuum cleaner or just spray some WD40 on them with a spray bottle. Make sure that you do not get too much of it on them since it could ruin their finish. After cleaning the ducts, you can wipe them down with a soft cloth to get rid of any excess oil.
How To Clean Exhaust Fan Duct?
1) There’s no need to clean the exhaust fan duct if it is insulated. However, if you do want to clean it, then you can take off the metal grille at the opening of the duct and remove dirt particles from the inside.
Sources & references used in this article:
- Air filter arrangement to permit cleaning without removing element (LVP Grotto – US Patent 4,222,755, 1980 – Google Patents)
- Exhaust fan (FJ Hoffman – US Patent 2,583,374, 1952 – Google Patents)
- Portable exhaust fan for removing airborne hazardous materials (ME Goyetche – US Patent 6,440,190, 2002 – Google Patents)
- Exhaust fan assembly and filter (EL Gibbs – US Patent 3,278,114, 1966 – Google Patents)
- Exhaust fan for removing airborne materials (ME Goyetche – US Patent 6,953,491, 2005 – Google Patents)
- Exhaust fan for removing airborne materials (ME Goyetche – US Patent 6,599,341, 2003 – Google Patents)