How do you clean blue stone steps?

How to Clean Blue Stone Steps?

The best way to clean blue stone steps is with a water based solution. You need to use a strong enough cleaner that will not damage the surface of the rock. A good idea would be to use one that contains baking soda or sodium hydroxide. These are two common cleaners used for cleaning up other types of rocks such as granite, basalt, etc…

You can buy these products at any hardware store or online from Amazon .

When using a product like this, make sure to follow the directions carefully. If you don’t, it could harm your steps. Also, if you have multiple steps that need to be cleaned, you might want to try mixing some of the solution together first before applying it directly onto each step. Then apply them all at once after rinsing off the excess solution.

What About Bleach?

Bleach is another option when cleaning blue stone steps. However, you shouldn’t use it on concrete because it can cause damage to the concrete.

Why Bleach Works Better Than Water?

If you look at the chemical structure of bleach, you’ll see that its molecular structure is very similar to water molecules. When bleach reacts with water, it forms hydrogen peroxide (H2O2). H2O2 is a powerful oxidizer which can break down organic compounds into their simpler components such as oxygen and carbon dioxide. However, there are some things to consider before you decide to use it. First of all, you must understand that bleach is a chemical that reacts with oxygen and produces toxic chemicals called free radicals.

Free radicals cause oxidation which damages the surface of the rock. The problem with bleach is that it does not kill all the bacteria living on the steps so they may still remain alive even after washing away the bleach solution. Therefore, it’s best to avoid using bleach on your steps unless absolutely necessary.

Bleach is cheap and easy to make at home. It’s also quite corrosive, so it can be used to remove rust if you dilute it with water first. However, you should always wear gloves when using bleach because it can also cause skin irritation.

You can buy chlorine bleach in two different types: anhydrous and the more common sodium hypochlorite.

how do you clean blue stone steps | remodelingmate.com

How to Clean Blue Stone Steps With Vinegar?

Another common household item that can be used to clean your bluestone steps is vinegar. You may have some in your kitchen right now and not even know it! Vinegar has mild acidic properties which are why it is such an efficient cleaner. To use it on your stone steps, mix some vinegar with water (preferably bottled). You can also use white vinegar or apple cider vinegar if you prefer.

Anhydrous bleach does not contain water and is stronger than sodium hypochlorite. It is rarely found for sale to the general public. The main reason for this is that it is a very unstable chemical and can even explode if exposed to sunlight or heat.

The next thing you need to know about bleach is that it comes in several different strengths. It also has other names such as: liquid chlorine, chlorine solution, sodium hypochlorite, and swimming pool chlorine. Using the same water technique from above, pour the solution on your steps and use a soft bristle brush to gently scrub off dirt and debris. Once you have finished cleaning the surface, rinse away the vinegar with water. If your stone steps are still discolored or stained, repeat the process until you get the desired result.

Due to the presence of acid in vinegar, you should avoid getting it onto wooden parts of your stairs or any other part of your home that could be damaged by acid. The most common types found in your local hardware store are 5.25% and 8.25%. The higher the concentration, the quicker it works and the more caustic it is. In other words, it’s going to be more likely to damage your steps if you’re not careful. Another thing you should know is that bleach breaks down very quickly in sunlight and water. It can also turn into a gas if left standing in one place for too long which can cause leaks inside your home.

Bleach is a common household cleaning agent that you can use to clean your bluestone steps. It does an excellent job of killing bacteria and other microorganisms that can cause stains and discoloration.

How to Clean Blue Stone Steps With Sandpaper?

You can also use sandpaper to clean your bluestone steps. Use an electric sander and start with a medium grit. If the stains or dirt are not coming off, you can move onto a finer grit.

How to Clean Blue Stone Steps With Lava Rock?

Lava rock is a very porous stone, so it’s important to seal it after cleaning or it will absorb everything around it like a sponge and stain your steps with rings of different colors. To clean and seal your stone steps at the same time, mix together two parts sand to one part flat paint. Apply this mixture to your steps with a medium-nap paint roller. Once this is done, let it dry and then apply a second coat.

How to Clean Blue Stone Steps With A Soft Bristle Brush?

If you are looking for a quick fix, you can also just use a soft bristle brush or even steel wool to get rid of debris and dirt. If there are any stubborn stains or dirt that won’t come off easily, spray it with a household cleaner before brushing.

How to Clean Blue Stone Steps With A Pressure Washer?

how do you clean blue stone steps | remodelingmate.com

A pressure washer is the fastest way to clean your bluestone. If you don’t have access to one, they can be rented from most hardware or home improvement stores. For advice on how much water pressure you’ll need for your particular job, check the specifications on the side of your machine. Most pressure washers have different nozzles that you can switch out to adjust the degree of “scrubbing” power that comes out of your sprayer. For instance if you’re using a nozzle with a red stripe, this means it’s the heaviest duty setting and will be perfect for cleaning out dirt or stains from your steps.

It’s important to make sure that whatever you’re cleaning doesn’t slide around while you’re cleaning it. Unless you have a super solid driveway, it’s probably not a good idea to clean your bluestone steps without something to secure them in place.

Does Your Driveway Need a Makeover?

If you have a concrete driveway that has become stained or discolored, you can try to restore the original color with a strong mixture of chlorine and water.

Make sure your driveway is clean and dry before you begin working, because once the acid hits the stains it’s going to start working quickly.

On the first part of your paving stones, mix one part chlorine with eight parts water in a spray bottle. For the second part, mix one part chlorine with six parts water. Get a soft bristle brush (like you would use on your teeth) and thoroughly scrub the stain.

Once you scrub all the stains you can see, let it sit for a few hours and come back to hose it off. You may need to apply more chemicals and water afterward to completely rinse out the stains.

If your driveway is still stained, discolored or dingy looking, it may be time to replace it entirely with new bluestone pavers.

Clean and seal your bluestones every spring to keep them looking their best all year long!

You might also be interested in: How to Clean and Seal a Concrete Patio

Sources & references used in this article: