How to Join Two Beam On A Post?
In this article we will discuss how to join two beams on a post. There are many types of posts available in the market.
They may be made from lumber or metal. Both have their advantages and disadvantages. You need to choose which type of post you want before deciding on how to join them together.
There are several ways to join two beams together: Bolting, Splitting, Tying, Joining with nails or screws and finally using a combination of these methods. All these methods require different skills and tools depending upon your needs and requirements.
Bolting is the most common method of joining two beams together. In bolting, one side of the beams is fixed while the other side remains free to move.
Bolts are driven into each end of the beams and secured with nuts and bolts. The bolt heads are then fastened onto another piece of wood so they don’t fall off during use. This method of joining is mostly used with old beams. Bolts can be recycled from old equipment, flooring, or other damaged wood.
Splitting method of joining two beams works in a similar manner to bolts. In this case, wooden wedges are driven through the beam where you want to join them.
The wedges are then hammered into place to hold the two beams together. This is a temporary way to join beams as they need to be continuously hammered back into place. The bolts are then tightened to the required level. This allows both beams to be joined together, while one side of the beams can still move independently.
Shims are usually placed between the two beams to avoid binding and to maintain a little space for movement. The use of washers, locking nuts and even safety bolts can improve the quality of the joint.
Bolting is often used to join short and long beams. This method is mostly used in carpentry and by people who don’t own a lot of tools.
Tying two beams together is an old carpentry technique that is rarely used today. In this method ropes are tied from one end of the beam to the other.
The ropes are then pulled taught to join the two pieces of wood together. This is a temporary solution to beam joining and not recommended unless you need a quick fix.
This method can be used to join large beams that are too heavy for you to pick up or lift. Splitting method is mostly used in carpentry and joinery, especially by professionals who are familiar with this method.
This method is not often used in modern construction due to the amount of labor involved.
Splitting or bolting method can be used to join short and long beams, but it is most effective for joining large beams that are too heavy or unsightly to lift.
A good example of beam joining is house raising. For this process, the two pieces of wood are placed on top of a couple of supports.
The two pieces are then tied together with rope to form a rectangular shape. This rectangular shape is then lifted into place and the rope used to raise it into position. In some cases, this shape is then bolted or nailed to the house frame
The above methods can be used to join two beams together in your projects. The most important thing in this method is to place the bolts or wedges in the right places.
It is a very temporary solution to beam joining and not recommended unless you need a quick fix.
Whether you need to join beams or cut them to size, there are quite a few different tools and materials that can help. Some of these include:
Any one of these tools will make cutting and joining wood much easier. If you need to, you can also use other materials such as metal or plastic.
These materials are cheaper but don’t offer the same flexibility or look as good. Which material you choose to join your wood depends on the project and your personal preference.
Regardless of the material you use, the basic process for joining or cutting wood is mostly the same. You need to pick out the right tool for your job and then clamp the wood in place.
Using the saw, you then cut through or split the wood to the desired length. After that, you can remove any unwanted pieces and sand or smooth off rough edges.
The type of beam joining you choose to use often depends on how much time and effort you wish to spend. Nailing and tacking is the quickest and easiest way to join wood but it isn’t as strong as other methods.
Nailing two beams together will often create a flexible joint that can come loose over time.
For a stronger joint, you can use bolts, screws or wedges to hold the pieces together. Bolts and screws are more secure than tacking or nailing though they require more time and effort to implement.
Wedges are an even quicker and easier solution than bolts and screws but they aren’t as strong. Using bolts or screws will ensure a strong joint that will last for a long time.
The most important thing to look out for when joining wood is making sure the pieces fit snugly together. There should be no noticeable space between the two pieces and there should be no movement or wobbling.
If the wood pieces don’t fit together tightly, the joint will be weak and are more likely to break.
The best way to ensure a tight fit is to first measure the width and depth of the wood and then mark these measurements onto the other piece. This will give you a guide to cut the second piece to size and ensure a perfect fit.
After you have the two pieces the right size, you then need to prepare them for joining. This often involves sanding, smoothing or jointing the sides of the pieces.
After this, you can then join the two pieces together. There are many different ways to join wood including:
These are the most common methods and you can choose the one you like best or depending on the type of project you are working on.
Once you have the two pieces joined together, the final step is to make the join look good and your project presentable. A round of wood can often have a lot of straight cuts, jagged cuts and harsh corners.
You can improve the look of your project by sanding, rounding and smoothing off the excess wood to create a more uniform edge or surface. This not only improves the look but makes it safer to handle as well.
Sources & references used in this article: