How do you fix water damaged floor joists?

How to Fix Water Damaged Floor Joists?

You need to have some kind of insulation between your floors and the walls. If not, then you will get water leaks all over the place. You can’t live without it!

And if you don’t have any insulation, then you must replace them immediately or else they are going to rot away very soon. So what’s wrong with using old drywall as an insulator? Well, it doesn’t work at all. It doesn’t stop water from leaking out. What’s worse is that you’ll probably end up having to replace the whole wall anyway because there won’t be enough room for the new drywall to fit properly.

The best thing you can do is to use a good quality wood glue like Wood Glue or Liquid Nails. It’s easy to apply and it works great. You just need to make sure that you have plenty of time before the water gets inside the house again so that you can patch up the hole in the floor first.

So what’s the solution? Use wood! Wood is strong and durable. It’s also easy to install and you can easily cut it into pieces.

You can even use plywood or other materials which are available in most home centers nowadays.

In fact, you could just buy a box of old drywall (or used sheetrock) and start patching up your floors right now!

How to Replace Rotted Floor Joists?

The first thing you’d want to do is find out exactly where the rotted floor joists are located. You’ll want to make sure that you replace all of them so that you don’t have to do it again in a few years. To do this, just follow the stringers (the long pieces of wood that span the width of your house between the floor joists.

how do you fix water damaged floor joists from our website

The best thing about this method is that you can easily patch up the floor from the inside and no one will ever know that you have done it. If you ever have guests over, then they will never know that there was ever a hole in your floor unless you tell them about it first! In most cases, they run perpendicular to the walls.

Once you find the rotted floor joists, you can start removing them. The quickest way to do this is with a crowbar or prybar. You may want to consider ripping up the subflooring (the board that the floor joists are sitting on top of) at this point too so that you don’t have to do it later.

Repairing water damaged floor joists is not as complicated as some people make it sound. Remember, you only need to fix the joist that are damaged. This will save you a lot of money and you can easily get the materials that you need from your local home improvement store.

How to replace rotted floor joist in crawl space?

Water damaged crawl space floor can be repaired in a similar way as described above. But you will have to get access to the joists from the bottom first. Sometimes this can be a major challenge if you have a deep crawl space and very little headroom.

In this case, you could temporarily support the floor above the affected joists while you are working. You may also have to remove an access panel inside your house so that you can get to them.

Here is a good tip. If you are ever faced with a hole in your floor, no matter what kind of floor it is, you should always fill the bottom with polyesterene foam before you patch the hole. This will prevent more moisture from getting into the house and causing more damage in the future.

How to repair rotted floor joists?

This is pretty simple. You can do it yourself if you have some carpentry experience. You won’t need to call a professional unless you are making complex repairs such as bridging two floor joists that are not next to each other.

If you have to do this, you had better know what you are doing and I would strongly advise that you call a professional.

This is not hard if you are experienced at carpentry. Just use the same framing techniques that you are used to working with. The only thing that you have to remember is to make sure that the replacement floor joists are at the same depth as the others so that your floor remains level.

how do you fix water damaged floor joists - Image

You can do this by measuring from the bottom of the subflooring. You should also remember to put furring strips under the new floor joists so that they have something solid to rest on top of.

This is one repair that you can easily do without calling in a professional. Just make sure that you take your time and you shouldn’t have any problems.

How to prevent water damage to wooden floor joists?

The best way to prevent water damage to wooden floor joists is to avoid it in the first place. Most water damage to wooden structures comes in the form of moisture, which over time causes the wood to rot and eventually collapse. What most people don’t realize is that wood is porous and will absorb water like a sponge if it is free flowing and not impeded in some way.

If you have a crawl space under your house, then you are more likely to have problems with water damage to wooden floor joists. This is due to the fact that the ground acts like a reservoir for moisture and will seep into your wooden structure over time.

Most of the time you won’t realize that this is happening until it is too late and you start seeing obvious signs like popping paint or warped doors. A good way to prevent this from happening is to use what is called a “sump pump”. This is a very handy contraption that is designed to keep the ground around your house dry by pumping out water that gets into the ground.

This is really cheap to install and will save you lots of money and hassles in the long run. Most home improvement stores can direct you to a good sump pump and they aren’t that expensive to buy either.

If you don’t feel comfortable installing it yourself, then you can have a handyman do it or do the work yourself if you feel that you are able.

Anyway, anything that you can do to keep water away from your wooden structure will help prevent against water damage and the rotting that comes with it.

If you already have water damage, then see above for how to repair rotted floor joists.

How to stop wooden floor joists from rotting

how do you fix water damaged floor joists on remodelingmate.com

There are a few ways that you can go about this. If you don’t feel like replacing your entire wooden floor joist, then there are ways that you can protect the wood from further damage. This is important because wooden structures like floor joists almost always expand and contract in certain weather conditions.

If left unchecked, this will cause them to eventually rot and then you’ll have a bigger problem on your hands than just some water damaged floor joists.

The first thing that you can do is to make sure that you keep the area under your home clean from leaves and other debris that might get caught against your house and hold moisture against it. This will help stop what little moisture that does seep into the ground from being trapped against your structure.

You should also make sure that you keep the ground around your house as dry as possible, more on this in a minute…

Other things that you might want to do is to coat the wood with some sort of sealer. There are several on the market that claim to do the trick and some even have a few government seals of approval on them. Be sure to read a few reviews on them though before settling on one because not all of them work as well as they claim to do.

You can also mix your own batch, using wood hardener and a few other common ingredients.

Whichever way you go about doing it, the idea is to coat the wood with something that will seal out the moisture. You need to keep in mind though that if you do this, it isn’t going to last forever, so you’ll have to re-treat the wood on a regular basis in order for it to work properly. Just keep this in mind before you decide which way you wish to go about doing this.

How to replace rotted floor joists

Of course, the other way of dealing with rotted floor joists is to just replace them. I know, I know…

how do you fix water damaged floor joists - remodelingmate.com

who wants to take on a major project like this right? Well, it’s either that or call your real estate agent and sell the place because you’re going to have to do this sooner or later anyway.

You can remove and replace just the rotted floor joists or you can replace the entire floor if you have the money. Either way, it’s going to be a lot of work and quite costly. You’re looking at spending somewhere in the range of $1,000 or more on supplies alone.

You’re going to need new materials, a new hand saw, a hammer, Phillips head screwdriver, wood glue, a few 2 by 4’s, 2 by 12’s and whatever else your floor joists are (2 by 10’s, etc). You’ll also need lots of wood screws.

Begin by removing anything that is nailed down. This is to make sure that the work area is as clean as possible so you’re not tripping over things while you work. You don’t want to have to move all that stuff back where it was after the floor is installed.

Now you’ll need to access what needs to be replaced. Some boards may just be loose, so those can be pulled up and replaced later. Other boards and joists will need to be cut out and these areas should be marked in some way so that everything can be put back as close to its original spot as possible.

You’ll also want to make sure that you don’t accidentally break the external boards on your basement walls. Most basements have at least one wall that is partially exposed to the outside world. You don’t want to damage this during your repair work and have the elements come flooding in.

From here, you can either remove everything that needs to be replaced or you can cut out just what needs to be replaced and slowly patch everything back together as you replace loose or rotted boards. The approach you take is completely up to you.

Whatever you do, be sure that the new material is slightly longer than the old so you can have a little wiggle room with aligning it properly.

You’ll also want to make sure that you stagger your seams. This just means that you don’t align the seams of two pieces together and ensures better stability.

If you’re removing everything that needs to be replaced, dig out a small area around the rotted board (or boards) and slowly cut away at it using the hammer and screwdriver (or pry bar). The idea here is to not just yank up a board when you’re cutting through it. Not only will this probably cause you to damage the surrounding boards, but it can be dangerous as well.

You’ll need to dig out a few inches on either side of the rotted board (or boards) and cut through it slowly. Continue this process until you can pull up the entire board. Now that you have room to work, you can start cutting through the board.

how do you fix water damaged floor joists - Image

Use your prying tool to slowly get under the board and pry it up. If it’s a smaller rotted area on the edge of a board, you should be able to pry up an entire section.

After you’ve gotten it started, you can use your prying tool in a back and forth sawing motion until the board begins to separate from the rest of the floor.

Continue this process on the other side of the board until you can pull up the rotted board. If you find that the floor is weak in this area, you’ll want to add some support before replacing the board. This can be done by screwing in short 2 by 4’s at an angle or more sturdy 2 by 4’s lengthwise.

You may also need to notch out a bit of the old floor to get your new boards to sit flush against the joists. The joists can be easily spotted as they are the only wood that run from wall to wall and span the entire basement. You’ll also want to remove any nails that you don’t think you’ll be able to get out and replace them with screws since you don’t want any rot to start in your new flooring.

You can now start replacing your rotted boards. Cut out the rotted area first and then slowly cut the board itself. It should only take a few minutes for each board on average.

After each board is replaced, you’re going to need to put some weight on it to ensure that it’s laying flat and flush against the surrounding boards. You’ll also want to make sure that it’s sitting securely on the joists so that it doesn’t move around. You can use anything that’s solid and heavy such as bricks, pieces of scrap wood, or bags of sand.

With each board you replace, you’ll want to also screw it down into the joist below using a drill and screws. Be sure to lay out your pattern before hand so you know where you need to place your screws. You’ll want to first drill a small hole and then put in the screw.

Don’t over tighten as this can cause the board to buckle up.

Continue replacing boards and adding screws until you’ve replaced them all. Before you go upstairs, you may want to add a few more screws along the seams of your new flooring just to be safe.

Once you’ve finished replacing the rotted boards, you’ll want to fill in around the new ones so that future water damage can’t get in. You can use normal floor or wall base from any home improvement store. Just make sure it’s compatible with what you’re laying the floor over (i.e.

don’t use concrete in the case of a basement floor).

Sources & references used in this article: