How do you put finished edges on plywood?

How to Put Finished Edges on Plywood?

Edging plywood is one of the most common tasks that are performed by woodworkers. It is not only useful for protecting the surface of the board from scratches, but it also helps to protect the boards from being warped or deformed during use.

Plywood edges are often used to provide decorative elements such as trim around windows, doors, and other openings. They may also be used to add visual interest to the interior of a building. Mechanically, plywood edge trim is used to cover gaps between panels and add strength.

When edging plywood, it is important to keep several things in mind.

However, in order to finish plywood edges properly and achieve a professional result, there are several things that you need to take into consideration. This guide will explain everything that you need to know.

1. Types of Edging

There are a few different ways that you can edge plywood. The first is to use hardwood edging. This type of edging is available at most home improvement stores and comes in a variety of sizes and profiles. These edges can be glued on directly to the plywood using wood glue.

The second option is to simply round over the edges of the plywood with a router or a biscuit cutter. This is the quickest and easiest way to edge plywood.

The third and most difficult way to edge plywood is to use hardwood strips to edge the plywood. This approach is more difficult because you need to add an inner frame to the plywood before wrapping the plywood with hardwood.

2. Preparing the Plywood Edges

how do you put finished edges on plywood -

Regardless of which type of edging that you use, you need to prepare the plywood edges before adding the edging.

If you are using hardwood strips to edge the plywood, you first need to create a ¾” – 1″ x ¾” – 1″ frame around the plywood. Measure the width and height of the plywood and then measure a corresponding frame that is slightly larger than the plywood. Use wood glue and nails to secure the frame to the plywood.

If you are using hardwood edging, then you need to round over the plywood edges. You can do this using a router and a special plywood bit or you can do this by hand with sandpaper.

There are tools that can help you to easily round over plywood edges. The tool clamps to the edge of the plywood and uses interchangeable bits that can be adjusted to the radius that you want. This allows you to quickly and easily round over the plywood edges.

After rounding over the plywood edges, you can add your hardwood edging.

3. Applying the Edging

Whether you are using hardwood strips or hardwood edging, you need to apply the edging. Start by clamping a guide strip to the plywood.

The guide strip needs to be just slightly wider than the edging. This prevents the edging from slipping off the edges of the plywood.

Glue and nail the edging to the plywood. Use some clamps and a caul to ensure that the edging is held firmly in place while the glue dries.

When the glue has dried, you can remove the clamps and the caul.

4. Edging the Corners

If you are working on a large project, you may need to edge the corners as well. This is actually very easy to do.

To edge the plywood corners, you simply need to cut a 45 degree bevel on the edges of the plywood. This is easily accomplished with a table saw or a circular saw and a bevel attachment.

how do you put finished edges on plywood at

After cutting the bevel on the edges, you can then round over the corners using a router and a special corner rounding bit.

5. Conclusion

By following the 4 simple steps listed above, you can easily learn how to edge plywood. Hardwood strips and edging are the 2 most common ways to edge plywood. Each method has its own pros and cons so you need to decide which one works best for your needs.

The tools that you need are also very affordable and can easily be found online or at your local home improvement store.

Sources & references used in this article: