How to Remove Plywood Underlayment?
The first thing you need to know is that it is very difficult to remove plywood underlayment. You will have to use special tools or professional services. However, if you are willing to invest some money into your home improvement project then you may want to consider using these professionals’ expertise.
Plywood underlayment is usually made up of a mixture of different materials such as fiberglass, wood shavings, and even plastic. These materials may not only cause problems when they get wet but also when they dry out. If you don’t take proper care of them, they can become brittle and break easily.
This causes water to seep through cracks in the material causing mold growth which can ruin your flooring plans completely!
If you are planning to install new carpet in your home, then you would be better off replacing the old carpet with a waterproof one instead. However, if you are installing new flooring in your house, then you might want to try to replace the plywood underlayment. There are many reasons why this could be beneficial for your home renovation project.
One reason being that it will make the job easier since there won’t be any leaks anymore.
In order to prevent damage to your floors, you need to make sure that you are taking good care of the plywood underlayment. To remove it, you will need a few simple tools. One of the most important things is a sharp blade.
A dull one could potentially cause more harm than good.
Reasons why you need to remove plywood underlayment
Let’s say that it was raining outside and you were walking across your living room floor. This would be a disaster since your carpet would get soaked and might even start to rot. Not to mention the moisture that would build up under the carpet which could also cause a bad smell.
With plywood underlayment, this problem could be prevented since it allows water to drain through.
Another reason why you might want to remove your plywood underlayment is so that you can have more leg room. If you are installing hardwood flooring, then you would need to remove the plywood altogether. If you just want more space then you can buy the necessary tools and supplies to do it on your own.
This way you would be able to save a lot of money as well as time.
How to remove plywood underlayment?
If you are still not sure how to remove plywood underlayment, then don’t worry. You can always hire a professional for this job. If you are doing it yourself then just follow the steps below.
1. Shut off the power first before you do anything else. This is very important since you don’t want to get shocked!
However, this is not the case with plywood underlayment. More often than not, water gets trapped and cannot escape. When this happens, moisture starts to build up which can lead to serious problems in the long run.
The best way to prevent this is to remove the plywood underlayment altogether. If you have already installed it and are experiencing these issues, then be sure to contact a professional to fix the problem as soon as possible. There are professionals who know exactly what to do when this happens. They may need to use a de-humidifier in order to get rid of the moisture.
It is rather easy to remove plywood underlayment and you can do it yourself if you have the right tools. If you don’t feel comfortable with the idea of doing it yourself, then you can always hire someone to do it for you. There are professionals who deal with this type of job on a regular basis, so it would be wise to hire them over trying to do it yourself and making a mistake.
If you do decide to take the project on yourself then you will need a few simple tools. The most important one being a sharp blade in case you have to cut the plywood. A screwdriver will also do since you may need to remove the nails holding the plywood to the floor.
If you are going to be pulling up your carpet as well then you will need a carpet knife as well. I know all of this stuff may seem daunting at first, but try to stay calm and you will be able to get through this.
Now the first thing that you will want to do is find all of the nails holding down the plywood. Scrutinize every inch of the floor in order to find them all.
Sources & references used in this article:
- Easy to install and remove tile system (LM Wise, JF Mathis, KM Anspach… – US Patent App. 14 …, 2016 – Google Patents)
- Easy to install and remove tile system (LM Wise, JF Mathis, KM Anspach… – US Patent …, 2016 – Google Patents)
- Easy to install and remove tile system (LM Wise, JF Mathis, KM Anspach… – US Patent …, 2012 – Google Patents)
- Method of installing a floor covering underlayment composite over a subfloor (ME Buckwalter, WJ Kauffman – US Patent 6,673,177, 2004 – Google Patents)
- A Novel Approach of Chitosan Additive to Remove Formaldehyde from Building Materials (HC Wang, SY Kang, CH Tseng, WC Shau… – Advanced Materials …, 2011 – Trans Tech Publ)
- Roof underlayment (TR Johnson – US Patent 7,685,785, 2010 – Google Patents)
- Underlayment composite and associated flooring installation system (ME Buckwater, WJ Kauffman – US Patent 6,599,599, 2003 – Google Patents)