How do you tile a wedi shower pan?

How do you tile a wedi shower pan?

There are many types of wicker shavers, but they all have one thing in common: They’re made from woven wood or bamboo materials. Wicker shaver is a type of furniture used since the Middle Ages. These wooden pieces were originally used for decoration purposes and later became popular with homeowners due to their durability and affordability.

The most commonly used material for wicker shavers is bamboo. However, there are other types of woods such as maple, ash, walnut and others. There are different kinds of wicker shavers that come in various sizes and shapes.

Some are made out of solid wood while some have a fluted shape like a bowl or even a vase.

Wicker Shaving Basics

Wicker shavers are usually made out of two parts: A frame and a top part. The frame is made up of strips of wood that are glued together. The top part consists of a piece of wood that fits into the bottom portion of the frame.

The frames may be square, rectangular or round depending on what kind of wicker shaver you want to make. Most wicker shavers have a handle, which allows them to be hung up on a wall or shelf.

A wicker shaver is usually made out of two parts – the upper part (or “wicker”) and the lower part (the “shower”). The upper part is generally made of wood while the lower part consists of fabric or other materials. The fabric may consist of cotton, silk, wool, linen or any other natural fiber.

The upper part is woven into the lower part to make a wicker tray.

Wicker trays are used for various purposes in the home, but most commonly used as a decorative tray or bread basket for storing magazines and newspapers. They can also be used as a bathtub caddy in a bathroom. Other than these uses, wicker trays are very popular pieces for decoration in various rooms of the house.

how do you tile a wedi shower pan on remodelingmate.com

They come in all sizes and can be hung from a hook or placed on a table or shelf for display.

How to Clean Wicker Shaver

Wicker shavers can be cleaned using mild soaps and water. You can use a soft cloth with soapy water to clean the entire piece. Don’t use abrasive cleaning pads or liquids as these may damage the wood.

After cleaning thoroughly, hang to dry in a ventilated area. Do not place near a heat source such as a radiator or stove.

Wicker shavers are made of wood, which means they can rot if kept in contact with water for extended periods of time. Always make sure to dry the entire piece before placing elsewhere.

Clean your wicker shaver at least once a month or whenever it is dirty. If you use your wicker shaver as a bread bin or to store newspapers, you should clean it at least twice a month. The more you use it, the more often you need to clean it.

Cleaning your wicker shaver is an important step in keeping your home neat and tidy. Not only does it keep the wicker shaver clean and pretty, it also keeps harmful fungus, mold and mildew from growing in your wicker shaver. It’s a good idea to get into the habit of cleaning your wicker shaver on a regular basis.

Wicker shavers are made from natural wood materials. This means they can easily be infested with insects and bugs such as termites and ants if they come in prolonged contact with water. It’s very important that you air dry your wicker shaver after each use and place it in a ventilated area at all other times.

How to Clean Fabric Parts of a Wicker Shaver

Wicker trays are made from different types of cloth such as cotton, silk, wool, linen, or any other natural fiber. Some may even be made from a combination of different materials. The fabric is attached to the wicker backing using a special type of adhesive.

Cleaning the Fabric Parts

You can clean the fabric parts of your wicker shaver regularly, provided the adhesive has not dried out or become brittle with age. Use only mild soap and water to clean the fabric since using harsh solvents may damage the adhesive holding the fabric onto the backing.

how do you tile a wedi shower pan - Image

After cleaning, let the parts air dry completely before reassembling them. Do not place the wicker shaver near any heat source such as a radiator or stove as this can cause the adhesive to dry out prematurely.

How to Replace Fabric on Wicker Shaver

If your wicker shaver’s fabric becomes soiled or damaged beyond cleaning, you can replace it easily yourself.

Purchase replacement fabric. The type of fabric that you need will depend on what type your wicker shaver is currently covered with. If you have a wicker shaver with woven fabric, you can get the same type or a similar type of woven fabric in either a solid color or a print.

Woven fabrics come in strips a few inches wide and several feet long. There are several porportions of strips to blankets; you will need one blanket for each side of the wicker shaver. You will also need extra to allow for mistakes.

It is best to buy a little more than you need rather than not enough.

Woven fabrics come in many different colors and patterns. Be sure to pick a color or pattern that will match your wicker shaver. If your wicker shaver has a wooden top and bottom, go with a plain color such as white, beige, tan or a light blue.

If your wicker shaver has a wooden top and bottom, you can also get a print to match the wood. If your wicker shaver has a metal top and bottom, go with a dark color or a print with dark colors.

Woven fabrics are measured by the yard. One yard of woven fabric is enough to cover the sides of a small wicker shaver. You will need two yards to cover the sides of a large wicker shaver.

Purchase enough woven fabric to cover all three sides of your wicker shaver plus a little extra to allow for mistakes. If you like, you can also buy a few matching scraps of fabric to use for accent pieces such as covering the buttons.

how do you tile a wedi shower pan - Picture

Buy a strip of adhesive fabric tape. Fabric tape is sold by the roll and measures one inch wide. It is sold by the fabric store where you bought your woven fabric.

You will need one roll for every foot of woven fabric that you are covering your wicker shaver with.

While you are at the fabric store, pick up a few extra pins and a small bottle of starch. The pins will be used later on in the project and the bottle of starch will be needed to re-secure the glued fabric onto the wicker backing.

Stitch witchery is used to re-secure the fabric to the wicker backing; you will need to practice this technique before you start.

Take your time and re-cover each side of the wicker shaver with fabric. Use the tape to help secure the fabric edges that butt up against other pieces of fabric. Press the seams with an iron after sewing them.

How to Care for Fabric on Wicker Shaver

While you will not have to do much, there are a few things that you will need to do in order to keep the fabric looking nice on your wicker shaver.

Re-secure any edges of fabric that become loose with starch and an iron as you did when you first covered the wicker shaver.

Clean the wicker shaver as needed. Covered wicker shavers can get quite dirty if they are used a lot.

Wash the fabric on your wicker shaver by hand or in the washing machine. If you wash it in the machine, use cold water and a mild detergent. Do not use bleach or fabric softener.

Dry the shaver flat or hang to dry. Put a towel in with the shaver to speed up the drying process.

Sit back and enjoy your new shaver.

how do you tile a wedi shower pan - Picture

Hints

If you count all of the strips in each of the different proportions, you will find that you can use any proportion of strips to cover your wicker shaver. If you want to use all the strips from one size package, you can use one proportion. If you want to use all of the strips from two size packages, you can use another proportion.

You will have even more proportions available if you buy the largest size packages.

Strips that are shorter than four inches don’t look very good on a wicker shaver. It is best to either not use them at all or use them in conjunction with strips that are longer than four inches.

If you want a stripe pattern, make sure that the stripes run from side to side. Stripes that run top to bottom will look odd.

While some people are able to carefully apply the strips without puckering them, some people are not. It is best to practice applying straight strips before you begin putting the shaver together. If you don’t have anything on hand to re-cover, borrow a purse from your wife, mother, daughter, next-door neighbor or friend.

If you are lucky enough to have acquired an entire box of the same size strips, you can use all of them to make one large square. The larger the square, the easier it will be to apply a solid color to it.

You can cover an entire wicker shaver with single strips or you can mix up the strips. For example, you could cover one side of the shaver with medium strips and the opposite side with small strips. When putting strips next to each other, be sure to alternate their direction so that the seam between them is not visible from any angle.

If you have an old wicker shaver that doesn’t have a solid color on it, you can create your own design. While you will probably have to do some practicing before you get the design just right, you can use a pencil and tissue paper to create your own unique patterns.

If you want a solid color on your shaver but don’t want to bother with strips, you can paint it instead. You will need to use acrylic paint because it is water resistant. You can either paint the entire thing one solid color or you can use various sizes of round brushstrokes to create your own design.

You will want to use a darker color for the base coat and then use a lighter color (any color except white) for the design.

If you don’t like the designs that are on commercially available shavers, you can also paint your own designs on them. You can either copy an existing painting or create your own. If you copy an existing painting, make sure that it is in the public domain and that you have permission to use it.

You can also use online resources to find other designs that you may want to use for inspiration.

how do you tile a wedi shower pan from our website

If you are creating your own design, think of something that is meaningful to you or something that you like. It can be a landscape, a still life, an animal, a person, a name or anything else that you can imagine. If you don’t have any artistic skills, you can look at other everyday objects and turn them into a design.

For example, you could take a picture of your kid and turn it into a design.

Once you have your design picked out, draw a copy of it on a piece of paper. Use this copy to make a template for the size and shape of each piece that you need to cut out. If you want the entire design to be one solid color, then skip this step.

Decide whether you want your design to face up when the shaver is closed or face down. This will depend upon how the design looks. For example, a landscape will probably look better facing up while a portrait will look better facing down.

When you make your cuts, always place the wicker so that the “grain” or fiber direction is going vertically. This makes the strips stronger and less likely to tear.

Glue the wicker onto the cardboard using a hot glue gun . Be careful not to burn yourself.

Sometimes, you just need to replace your old razor blades. If you find that your shaver is not cutting as well as it used to or if it is pulling the hair rather than cutting it, then you will need to change the blade.

The first thing that you need to do is to unlock the storage compartment in the handle of your shaver. Most razors have a screw on the back of them that needs to be removed in order to do this. Be sure not to lose this screw because you will need to put it back in after you change the blades.

Once you remove the screw, the storage compartment should slide out of the handle. It may be a little tight at first, but it will come out. Now, you will see the old blade as well as two small metal prongs that hold it in place.

Take care when removing the blade because these prongs are very sharp and can cut you if you aren’t careful.

You can either throw away the old blade or you can keep it and try to straighten it out first. If you decide to keep it, place it somewhere safe so that you don’t cut yourself later on.

The new cartridge of blades should come with two metal strips and a new set of those two sharp prongs that hold the blade in place. The strips go underneath the metal prongs and then the whole cartridge slides onto the post that holds it in place.

how do you tile a wedi shower pan - remodelingmate.com

Before you try to slide the cartridge on, take a look at the back of it. There should be a gray strip that is higher or lower than the rest of the metal. This is the stop and it determines whether your shaver will open and face up or face down.

Now all you have to do is line up the new blade with the two prongs and push down slowly while you slide it into place. Remember that gray stop? It should be facing the right way if you lined everything up correctly. The new blade should be securely in place and your razor is good as new.

This is one of those things that you could probably leave to your kids to do sometime in the future.

Now that your razor is all fixed up, go test it out on that 5 o’clock shadow.

Sources & references used in this article: