How do you use outside corner molding?

How to Install Outside Corner Molding

The first thing you need to decide is whether you want to install inside or outside corner molding. If it’s just an interior room, then installing outside corner molding might not be necessary since there will only be one way in and out of the room.

However if your house has multiple rooms with different access points, then installing outside corner molding would definitely come in handy. So what are some advantages and disadvantages of both?

Advantages of Installing Outside Corner Molding

You don’t have to buy expensive masonry material. You can get it from hardware stores or online.

The cost is usually cheaper than buying masonry material. You can easily install it yourself with no experience required. It looks better and more professional looking than any other type of moldings you may have installed before.

Disadvantages of Installing Outside Corner Molding

There are several drawbacks when installing outside corner molding. These include:

It takes longer to install because you have to cut it out of the existing wall. You may have to hire someone else to help you.

You will have less privacy since the corner won’t be completely hidden from view. It requires more skill and time than other types of moldings so it isn’t something that most homeowners can afford right away. You can easily install it around windows and doors.

Disadvantages of Installing Outside Corner Molding

Installing outside corner molding is very time consuming and labor intensive. It requires lots of tools like a jigsaw, drill press, hand trowel, nail gun etc.

how do you use outside corner molding - Image

You’ll need to spend money on materials too such as wood screws, metal brackets etc.

Taking all of this into consideration, it is important to think about your particular situation and weigh the pros and cons before making a decision on which type of corner you want to purchase. Not to mention you will have to make lots of trips to the hardware store.

It isn’t very stable and can easily be kicked out of place by intruders. This type of molding doesn’t maximize space or provide adequate cover. You are also more likely to run into law enforcement since it’s more visible to everyone.

The decision is ultimately up to you. Hopefully this article has given you the knowledge and confidence to make an informed decision.

How to Cut Outside Corners Without Miter Saw

The most popular question asked by do-it-yourself homeowners is how to cut outside corner molding. The best way how to is using inside corner bead.

This type of molding can be easily cut with a simple miter saw. It is quick and easy to install, which gives home improvement projects a nice clean finished look.

So how do you cut outside corner molding without a miter saw?

It is easy to do as long as you have the right tools. Most common household tools can be used in place of a miter saw.

These tools include: handsaws, hacksaws, files, drill, pliers, channel locks and a screwdriver. Below you will find step by step instructions on how to do it.

The first step is to measure the length of the inside corner. Next, cut equal length pieces of molding off both sides of the main piece.

how do you use outside corner molding from our website

Once both pieces are cut, you will need to measure the length and cut the ends at an angle. Both cut ends should be at a 23 ½ degree angle.

The next step is to fit the pieces into place and mark where the expansion holes and screw holes are. Once all the holes are marked, you will need to drill starter holes and then use a file to clean up the cut ends so they are smooth.

Next you will need to apply molding adhesive to the back of the cut pieces and insert them into place. Finally, insert wood screws through the wall studs into the cut ends of the molding.

Check for squareness before installation is complete.

The process detailed above is not as easy as using a miter saw, but it can be done with simple household tools and does a good job.

Over time the ends of the molding may crack or start to peel away from the wall. If this happens you will need to remove the molding and apply new adhesive before reinstalling.

Maintaining outside corner molding can prolong the life of this type of molding. These tips should be helpful when trying to choose between inside and outside corner molding for your home improvement project.

How to Cut Outside Corners With Hacksaw

In a pinch, you can always use a hacksaw to cut outside corner molding. Just follow the same guidelines listed above and cut equal lengths off both sides of the main piece.

Next measure the length and cut the ends at an angle with a hacksaw. Be careful not to cut your fingers.

The next step is to fit the pieces into place and fasten them to the wall. Use drywall screws to secure the molding in place.

This method is not as easy or as safe as using a miter saw. It can be very dangerous to cut molding with a hacksaw and it is also time consuming.

Hacksaw blades are also prone to breaking easily.

Precision is also an issue and the cut ends of the molding won’t be as smooth. A miter saw always produces nice 90 degree cuts and doesn’t leave excess material that needs to be trimmed off.

how do you use outside corner molding from our website

If you find yourself without a miter saw and in need of some outside corner molding, you can always try cutting it with a hacksaw. Just remember to take your time and go slow.

If you have any questions about this story, please feel free to ask. Your questions help me improve and be able to provide more helpful information in the future.

Thank you for reading! I hope you come back to read more helpful stories in the future.

=)

Also, if you like stories such as this one, please bookmark this site and check back every once in awhile for new stories. I have many more!

Thank you and have a great day!

-John

Sources & references used in this article: