How long do cedar siding shingles last?

How Long Does Cedar Shaking Siding Last?

Cedar shingles are made from the wood of Douglas fir trees. They are usually used for exterior walls, especially those which have a rustic look or if they need to withstand high winds. Cement board is often substituted for cedar shakes because it’s cheaper than real cedar. However, cement boards will eventually crack due to weather damage and must be replaced sooner rather than later. If you’re concerned about your house being damaged by high winds, then cement boards may not be the best choice.

The average life span of a cedar shake is between 50 years and 100 years depending upon where it was grown and what type of climate it’s located in. A typical shed wall will last around 25 years before cracking.

If you live in a hot climate, then the longevity of your shakes will be shorter. In fact, they might even start to fall apart after only five years. You could replace them with plywood instead if you want to save money. Plywood will last longer than cedar shakes but won’t stand up to the elements as well. The most common way to tell whether a shake is in good condition or needs replacing is by checking its longevity.

If the shake cracks after 50 years, then it’s probably time to replace it. If the shake doesn’t crack at all, then you can safely assume that it’s in excellent condition and won’t need replacement until you decide to do so.

Cedar Shingles Must Be Replaced Every 15 To 25 Years

Even if you live in an area that doesn’t get a lot of snow or rain, you still need to replace your cedar shingles every 15 to 25 years. This is because they will start to dry out and crack no matter where you live. It’s just the natural process of oxidation that will cause this to happen. If the shake cracks before 50 years have passed, then you probably need to start replacing them.

How Long Do Cedar Shingles Last?

The typical life span for a cedar siding shingle is between 30-40 years. They crack over time and the wood starts to rot due to moisture. Sometimes they turn completely black. Over time they also lose their ability to keep out water so even minor storms could cause leaks around your house. This might not seem like a big deal at first.

After all, who really cares if your roof has a few cracks in it?

how long do cedar siding shingles last | remodelingmate.com

Well, what happens is this: the cracks will start to collect dirt and debris. Eventually, small creatures such as mice or squirrels will try to build a nest inside the crack. Even worse, rainwater will get in there as well. This is a sure-fire way to cause your cedar shakes to rot and become unstable. Eventually, pieces will start to fall off your roof and you could be in real danger of serious injury.

If you have cedar shakes on your roof, then you should consider replacing them every 20-30 years. It’s a good idea to hire a professional to do this work for you. Otherwise, you might make the problem worse by damaging other shakes while trying to remove them. You can replace your shakes with new cedar or another material such as metal.

The typical cedar shake roof lasts between 20-40 years on average. However, they can be replaced with asphalt shingles to extend their life by another 10 to 20 years. This is a good idea if you live in an area that has very cold winters because asphalt is less brittle and more flexible than cedar.

Asphalt shingles also come in many different colors and designs, so you can be sure to find something that matches the style of the house. It’s your choice.

Metal Roofing Lasts Roughly 30 To 50 Years

Metal roofing comes in various forms including steel, copper, and tin. They all have comparable lifespans, with the exception of tin which won’t last as long due to rusting. Tin will eventually turn completely black as well.

The average lifespan of metal roofing material is between 30 to 50 years depending upon the type you choose to install. However, asphalt will not blend in with the environment in the same way that cedar does so keep that in mind. Also, asphalt is known to give off a strong odor when the sun’s rays hit it on a hot day. It’s best to avoid this type of material if your home has a view of the mountains because it will be plainly visible from quite a distance and may clash with the natural setting. It all depends upon the climate you live in and the level of maintenance you’re willing to provide.

Copper roofing is the most expensive type of metal roofing and can cost anywhere from $6 to $15 per square foot installed.

You can get a chain link fence for around $4 per linear foot. You can also get any number of other types of fences including wood and vinyl.

Metal roofing is also heavy and can’t be repaired or replaced easily if damaged. It’s not something most homeowners are going to be willing to install on their own even if you offer diagrams and step-by-step instructions because it requires several special tools designed for cutting the material.

how long do cedar siding shingles last | remodelingmate.com

Any numbers given are just estimates because prices can vary from region to region and depend upon the market. It also requires getting up on the roof and that’s not going to be easy for most people.

Evaluate Your Options Carefully Before You Make Your Choice

The important thing to do is weigh all of your options. If you decide that asphalt is the right choice then make sure you get a high-quality brand installed by a professional. Try not to go with the cheapest option because it will only have to be replaced again in twenty or thirty years. That’s money down the drain.

You can save money by getting a less expensive material or doing the installation yourself, but remember that it’s not going to be as durable as the professional grade asphalt. If you’re on a tight budget then this may be the way to go.

Trying to cut corners by hiring an amateur and using cheap materials is risky because shoddy installation can lead to more expensive problems down the road.

You should also look into getting metal roofing if you live in an area that sees a lot of snowfall or extreme weather. It’s also a good idea to let your local government know that you intend to apply for a building permit before the work begins to see if they offer any input.

It’s your future on the line here, so make the right decision and sleep soundly at night knowing you won’t have to worry about a roof over your head anytime soon.

You have installed a metal roof. You don’t want to pay twice for a roof.

Asphalt Shingle Styles

There are a few different types of asphalt shingles and each one has its benefits and drawbacks so you’ll need to decide which one is right for your situation.

If you’ve owned your home for many years then there’s a good chance the original roof is going to need to be replaced soon regardless of what type it is. Adding a second layer to an asphalt roof only adds about 20% to the overall cost of the project so it may be more beneficial for you to just tear everything off and put down a completely new slate.

A brand new asphalt roof will usually be the cheapest option.

If your current roof has incurred some minor damage but is still functioning, you can usually get away with adding a coat of “spot” tar to seal up the leaks. You might not be able to do this if the damage is extensive, but if you can then this will extend the life of the roof and save you money.

Metal roofing is a durable material that can last a very long time if installed correctly.

how long do cedar siding shingles last - remodelingmate.com

Installing a second layer of shingles on an existing roof may prolong its life a bit, but not by much. Most of the existing layers of felt paper and tar are probably in a state of decay already so adding another layer is not really going to do much except increase the weight of the roof which can actually cause the roof to sag over time.

If you want to keep the same style then I suggest using whatever is left over from your current roof for patching if needed. If you want a brand new look then choose a different type of shingle such as laminate, tile or metal.

If you have any doubts about your roof, or it’s too old and needs to be replaced anyway, then adding a second layer of asphalt shingles is probably not the best option for you.

Metal roofing comes in several different styles and colors.

Metal roofs have been used for centuries for a reason; they are durable and look great (if done right). They come is several different styles including standing seam, shingle, tile and corrugated. Each style has its benefits and drawbacks so you’ll have to decide which one works best for your situation.

Metal is usually the most expensive type of roofing, but it also tends to be the sturdiest; for example a properly installed standing seam metal roof can easily last over 100 years (under normal circumstances). If you’re looking for a more affordable metal roof then tile and corrugated are good choices since they don’t require much additional labor to install (thus reducing the overall cost).

A metal roof can come in several different colors so you’ll be able to choose one that blends in with your home. They also have a nice modern look to them and will complement any contemporary or futuristic looking home.

Metal roofs are probably the most durable type of roofing material available. Some types of metal tiles can withstand the weight of a fully loaded semi truck driving over it! They are also the most corrosion resistant material so they can easily withstand harsh weather conditions including snow, rain, wind and hail.

An older metal roof will look just as good (if not better) than a brand new rubber roof. A lot of people are surprised when they learn that the metal roof on someone’s house is actually several decades old! Most types of metal roofing will come with a 50 to 70 year warranty, but with proper maintenance, some types can last indefinitely.

You’ll often hear about people having problems with their metal roofs and them not working as expected; this usually happens when an inexperienced installer installs the roof poorly (such as missing fasteners or using sub-par materials).

Sources & references used in this article: