How Much Does It Cost To Put A Drain In A Basement?
In the United States, it costs approximately $1,000 to install a French drain in your basement. This figure includes labor and materials. You will need to pay for all necessary permits from local authorities before beginning construction work. If you are planning on installing a drain in your garage or other non-basement area of your home, then you may have to spend less money than what is listed above.
The total cost of installing a French drain in your basement depends upon several factors such as: size of the basement, type of soil conditions, and whether or not you want to use concrete or steel pipe. For example, if you live in a very dry climate where there is little moisture in the ground around your home, then it would be cheaper to purchase a standard plastic drain rather than go through the expense of building one out of stone.
Basement Drain Installation Costs – Size & Type Of Materials Required
If you are looking to install a drain in your basement, then you will most likely require some sort of plumbing equipment. There are two main types of drains available in the market today: plastic and concrete. Plastic drains are usually smaller than those made with concrete, but they do come at a higher price tag.
If you do decide to build a drain in your basement, then you will need to make sure that the location is well ventilated so that any odor problems don’t arise. You may also want to consider using a vapor barrier material like polyisocyanurate (PVC) to prevent mold growth. PVC is used extensively in homes today because it’s easy to install and provides excellent protection against mold.
Concrete drains can either be made from large pieces of materials that are set into the ground around your basement or they can come in the form of steel pipes. This type of drain is more labor-intensive to build, but they also tend to be more effective when it comes to holding water and they usually last longer than standard plastic pipes.
Another factor that will affect the overall cost of your basement drain is the soil composition around your home.
So now that you know how much does it cost to put a drain in a basement, what are you waiting for? Take the first step towards restoring the structural integrity of your home and call that plumber today!
Basement Waterproofing Cost
In addition to installing a French drain in your basement, you may also want to consider waterproofing your basement walls. There are several different types of basement wall sealers on the market. The three most popular types available are:
These three basement waterproofing systems all work differently, but they all have one goal in mind, and that is to prevent water from leaking into your basement. Each system comes with its own set of pros and cons, so it is up to you to choose which solution will be right for your home. While it is generally the floor that tends to suffer the most damage whenever a basement floods, the walls aren’t exactly safe either.
The average cost to waterproof your basement walls is anywhere between $1,000 and $5,000. This price range takes into consideration the labor and materials needed for a professional job. If you want to waterproof the walls yourself, then you can probably complete this project for much cheaper.
Before you can start waterproofing your basement walls, you will need to make sure that the area is well ventilated. You should also wear protective gear such as gloves and goggles while working on this project as well.
The first step is to check the state of your foundation. It is possible to do it yourself, but it is strongly advised that you hire a professional because if done incorrectly, your problems could potentially get a lot worse.
Before getting started on your waterproofing project, you should take the necessary precautions such as turning off your main power supply, draining your electrical system and turning off your water supply. If you don’t feel comfortable shutting off the main breaker, then you can always contact an electrician to do this job for you. Walk along the perimeter of your home and see if you notice any cracks in the concrete. If you do notice any cracks, you need to evaluate their length and width.
Longer cracks with a width greater than a half an inch should be filled in with hydraulic cement.
Hydraulic cement is mixed with water in a 1:3 ratio. The mixture should resemble the texture of peanut butter.
One method of filling in the cracks is to use a wood stick to place a small amount of hydraulic cement into the crack. Use a trowel or a flathead screwdriver to spread the cement out. Place a piece of cardboard over the crack and then walk on it in order to press the cement firmly into place. Once it has dried enough that it won’t get smudged, you can remove the cardboard and repeat this process two more times.
Make sure that you wait at least 12 hours before applying the second coat.
If you do not feel comfortable doing this yourself, you can always hire a professional to come in and do this for you.
As long as the cracks are shorter than 1/2 an inch or longer than 1ft, you can leave them alone. It is not worth it to fill in these smaller cracks because it is not going to make a difference. If you want to be extra safe, purchase a water drainage system and place it around your basement walls.
Wait at least a week before turning on any of your utilities. If the crack is longer than 2 inches, you may need the help of a professional. A professional will also be needed if you do not feel comfortable performing the crack filling process yourself.
Your basement will flood again if you do not do this part of the project.
Make sure to leave your house for a few hours in order for the mortar to dry. You can also install a sump pump during this step in order to avoid having your basement flood again. There are already instructions on how to do this available online and in books at your local library.
Once you are finished with your waterproofing, walk along the perimeter of your basement walls and make sure that everything is sealed up tightly. If you notice any cracks, check to see if they are under a electrical wire. If they are, you can’t do anything about it except fill in the crack with concrete after the wire has been moved.
You will need to purchase a dehumidifier in order to prevent mold from growing. They can be purchased at your local hardware store. You should place it somewhere near your water heater since that is most likely where the highest humidity will be located.
You can stop worrying about this project now and focus on something else. Your basement probably won’t flood again if you do catch any water leaking in, it will just seep into the ground. It would take years for this to happen though unless you have a pipe bust or something similar.
You always had a fear of water since you can’t swim. It’s amazing that you lived in such a damp environment and never realized it until it was too late.
Having done everything that you could to waterproof your basement and failing, you have no choice but to move. There are 2 methods for selecting a new house at this point- moving somewhere else within your city or moving to a different city altogether.
Sources & references used in this article:
- Keeping a Basement Dry (L Janesky – Fine Homebuilding Magazine – finehomebuilding.com)
- Why is Manhattan so expensive? Regulation and the rise in housing prices (EL Glaeser, J Gyourko, R Saks – The Journal of Law and …, 2005 – journals.uchicago.edu)
- How flood experience and risk perception influences protective actions and behaviours among Canadian homeowners (AT Durning, AB Durning – 1992 – WW Norton & Company)
- Powerful medicines: the benefits, risks, and costs of prescription drugs (J Thistlethwaite, D Henstra, C Brown… – Environmental …, 2018 – Springer)
- Reducing costs of monitoring networks in developing countries by collation and analysis of pre-existing hydrogeological data (J Avorn – 2008 – books.google.com)
- The willpower instinct: How self-control works, why it matters, and what you can do to get more of it (FA Akiwumi – IAHS Publications-Series of Proceedings and …, 1994 – researchgate.net)
- Leverage points: Places to intervene in a system (K McGonigal – 2011 – books.google.com)
- The big shift: How the University of Houston libraries moved everything (DH Meadows – 1999 – scrummaster.dk)