How Much Thompson Water Seal do I need?

How Much Thompson Water Seal Do I Need?

The amount of time it takes for your fence to dry depends on several factors. First, you need to consider the type of soil in which you have planted.

If you have used a sandy or loose-textured soil, then the water will take longer to dry out than if you had used a loamy or compacted soil. Second, you need to consider the weather conditions. If there are strong winds blowing, then the drying process may take even longer. Third, you need to consider whether or not your fence needs additional protection from the elements such as snow cover or ice. Finally, you need to consider whether or not your fence needs extra protection against theft due to its high value.

If you want to get a general idea of how much water it will take for your fence to dry out, you can use the following formula:

(Dry Time / Number of Days) x (Days Left in Season) = Dry Time

For example, if your fence requires 1/2 hour per day to dry out, then the dry time would be 2 hours per day. If you plant your fence in early spring, then the number of days left in the season would be 90.

Therefore, your dry time would be 180 hours (2 hours x 45 days). If you need to add snow fencing or ice fence to your high-value fence line, then this number will increase significantly.

Please note that this is just a guideline and is not meant to take the place of expert advice. You should always seek the advice of an expert before using this or any other formula.

How Long Does Thompson’s Water Seal Need To Dry Before Rain?

Thompson’s Water Seal is a water-based stain that should never be used on fences that are exposed to rain. The water in the fence will eventually rot the wood and cause it to become moldy and mildewed.

If your fence line is near or even in a low-lying area, then you will have to plan for additional time for the rain to dry before the next coat.

If it rains during the first coat of Thompson’s Water Seal, you should wait until all traces of water have dried completely before applying another coat. If it rains during the second or third coat, you should wait until the next day for it to dry completely before applying another coat.

how Much Thompson Water Seal do I need - remodelingmate.com

How Long Does Thompson’s Water Seal Last?

The life span of Thompson’s Water Seal largely depends on the type of wood, the sealant used, and external factors such as weather and human interaction. On average, you can expect your fence to last anywhere from 5 to 10 years if it is taken care of properly.

On the other hand, there are a number of things that can shorten the life of your fence. First and foremost, exposure to high levels of rain will rot the sealant and cause mold and mildew to develop.

For this reason, it is essential that you allow the sealant to dry before any rain is expected in the area. Second, human interaction such as sitting or leaning on freshly sealed wood should be avoided until the sealant has dried.

Also, as the years go by, you will notice that the color of the sealer will fade. This is completely natural and to be expected.

You can, however, combat this with proper care and attention. Always keep the area clean and free of debris so that you don’t accidentally track debris into your freshly sealed wood when you enter it. Use a soft bristle brush to remove dust and loose dirt before sealing your fence.

How To Clean Up Thompson’s Water Seal?

If you find yourself with a major spill of Thompson’s Water Seal, then it is very important that you clean up the spill as soon as possible. Use a dry or damp cloth to wipe up the stain.

DO NOT use any other cleaning product as this could potentially damage the finish on your fence.

Sources & references used in this article: