Column Parts Architecture
The Column Parts Architecture (CPA) is a type of column which consists of several different parts. These parts are used in the construction of a column. There are two types: the Partial CPA and Full CPA.
The Partial CPA is a simple design where only one or two part are used, while the full cpa is made up with many parts.
In the partial cpa, the column is built from several smaller pieces. For example, if there are three columns in a building, then each of them will have three sections. Each section can be made up of various materials such as stone or wood.
The material used determines how strong it is and how much weight it can support. In addition to these basic components, there may be decorative elements like capitals or other decorations which add character to the structure.
For example, if a column has four sections, then the first section would be made up of stone. The second section could be made out of wood and the third section could be made out of brick. If there are five sections, then the fourth section would be made out of stone and the fifth section would be made out of wood.
These different materials can make up different shapes depending on their purpose.
The Partial CPA is a very common type of column because it allows for greater flexibility in terms of size and shape. However, the design does not allow for maximum strength. A full cpa is designed so that every part contributes to its strength.
For example, if the top section was made out of iron, then the bottom section would be made out of steel and the sides out of concrete. By using multiple materials instead of just one, you increase your structural safety margin. For example, the first and fifth sections could be round while the second, third, and fourth sections could be rectangular.
The full cpa is similar except that it has multiple layers. Each layer could be made up of different materials for each section. For example, the first layer consists of three sections made out of stone, while the second layer consists of three sections made out of wood.
The third layer could consist of four sections made out of brick.
The full cpa is very strong and safe; however, it does not allow for a lot of variety in terms of size and shape. This means that if you want a tall and narrow building, it is not possible to do so with this design. With the pcp design, you will instead get a shorter and wider building.
A variation of the full cpa is the Half CPA.
Stories are more fun with pictures.
As you can see from the pictures, they are all types of columns. There are many other types of columns but these are the most common ones. Hope you enjoyed this article!
This type of design has the same strength as the full CPA, but it allows for more freedom in terms of shape and size. The Half-CPA is made up of 3 layers. As you go up the building, each layer is 1/2 the size of the layer below it. This means that you can have a tall and narrow building with a Half-CPA without sacrificing any strength.
Sources & references used in this article:
- Simulation oriented development of a new heat integrated distillation column and its characteristics for energy saving (T Takamatsu, M Nakaiwa, K Huang, T Akiya… – Computers & chemical …, 1997 – Elsevier)
- Optical column for charged particle beam device (HP Feuerbaum – US Patent 6,936,817, 2005 – Google Patents)
- Learning the parts of objects by non-negative matrix factorization (DD Lee, HS Seung – Nature, 1999 – nature.com)