What is the difference between baseboard and trim?

What is Baseboard?

Baseboard refers to any wood or other material used for the exterior of a house, which serves as a support structure. Usually it consists of one or more layers of different woods such as hardwoods (e.g., oak), softwoods (e.g., maple) and veneers (e.g., plywood).

The most common type of baseboard are the “cabinets” made from solid hardwood. They are usually painted white, but they can also have a decorative pattern like stripes or designs.

Cabinetry with patterns is called “patterned.” There are also cabinets with a design similar to those found in a home office (called “office”). These are often referred to as “office furniture”.

There are also some types of baseboard that consist of several pieces joined together. Such baseboards include:

Wall panels – these are typically made from solid hardwood and may be either solid or panelized. Wall panels can range in size from small (1×2) to large (3×4).

Panelization is when all the edges of the wall panel are joined together. The larger and heavier the wall panel, the more it will cost. The other advantage of wall panels is that they can be installed much easier when compared with solid wood because they are already pre-assembled.

Molding – this refers to decorative molding that adorns the top of the casing and baseboard. The most common types of molding include:

Corner blocks – these moldings are used at wall intersections and corners.

Strips – these are narrow panels typically 1 1/2″ wide or 1″ wide. They can be made from solid wood, MDF, plywood, and even hard board.

T-Moldings – this is typically used for baseboard that goes under cabinets and other cabinet-related moldings. They are not usually very wide (1″ or less).

Corners – these are a half-round molding that is used to cover up the gap where two walls meet at a corner.

what is the difference between baseboard and trim from our website

Trim – this refers to any sort of molding that goes along a wall or piece of furniture. It is typically referred to as “baseboard trim” when it is used as the bottom part of a wall (along the floor).

Other common types of trim include quarter-round, door casing, window casing, and chair rails.

Baseboards are used to protect walls from scuffs and scratches caused by chairs, tables, toys, and people. They also are helpful in protecting furniture and flooring from humidity damage caused by direct contact with the wall.

They give a room a finished appearance and can be designed to match or accentuate your wall and ceiling treatments. With basic carpentry skills, you can easily transform basic wall materials into elegant home furnishings.

Breaks At The Bottom Of Each Window Or Door

At first glance baseboards may seem like they are just covering up the gap between the floor and the wall. While this is true, there is much more to them than that.

They also hide gaps that occur between the edge of the floor and wall (at doorways and window). That means that windows and doors need a base trim that is slightly different than the rest of the wall.

Base trim is quite possibly the easiest part of the baseboard to install since it does not need to be attached to anything.

Casing is basically a fancy word for a base trim, therefore, all types of casing will fall into this step. This includes quarter-round, half-round, and door and window casings.

They all get installed in the same basic fashion with minor differences (which will be addressed).

Sources & references used in this article: