What screws to use for furring strips?

Furring Strip Installation Guide: Wood Screws For Furring Strips

The first thing you need to do when installing furring strips is to make sure that your furring strip will not fall down during installation. You may have seen some pictures on the internet showing how to put up a furring strip without using nails or screws. These are called “nailless” installations because they don’t require any kind of fasteners at all.

They look pretty good, but they aren’t practical.

If you want to avoid having to use nails or screws, then it’s better if you buy furring strips with screw holes. If you’re looking for something more permanent than just decorative purposes, then these types of furring strips are definitely the way to go. Furring strips made from wood screws are very strong and durable.

You’ll get a long lasting result even after years of regular use.

In order to prevent your furring strip from falling down during installation, you’ll need to make sure that it won’t be too close to the floor. A furring strip installed on the edge of a wall isn’t going to work well since it might come into contact with other objects such as furniture.

There are many different kinds of furring strips available today. Some of them come with nails or screws already installed, while others come with no fasteners at all. There are also those that have a bit of both options.

You can choose which type of furring strip you’d like to purchase based on several factors such as price, durability, and ease-of-installation. You should place the furring strip about two to three inches away from the wall so that it doesn’t interfere with anything.

Placing your furring strip in such a manner will also give you the freedom to add base shoe moulding later on. If you don’t have a lot of headroom in your room, then this is important since you’ll be able to use base shoe without having to cut your furring strips.

How To Attach Furring Strips To Joists

One of the most common types of furring strips is the wooden one which has a lip on the bottom side. This type of furring strip can be installed to plywood or to wood joists. There are times when you need to attach it to something else such as concrete though and that’s where wood screws and anchors come in handy.

Drywall screws for furring strips are by far the most common types of wood screws used for this purpose. They’re quite easy to install and you can find them at any local home improvement store.

what screws to use for furring strips - Image

Furring Strip Screws: How To Space Them Out

When you’re installing furring strips, you need to make sure that the screws or nails are installed at equal intervals.

If you’re planning on installing your furring strips in a dry area such as on a concrete wall or floor, then you should find the surface screws that are pre-installed. These surface screws will help your furring strip to stay in place and be more secure.

Next, you should drill guide holes into the joists or studs that you’ll be attaching your furring strips to. The holes should be placed so that the screw heads will fit inside of them. If you don’t space them out properly, then the furring strip won’t be sturdy enough to support the weight of your drywall.

Properly spaced furring strips will make your drywall installation a whole lot easier since you won’t have to struggle to keep it from falling down. If you have enough help during the installation process, then this isn’t as big of a concern. It’s always better to be safe than sorry though.

The last step is to place your furring strips over the joists and fasten them in place using the wood screws or nails. This will help you to prevent your furring strips from falling down over time since they’ll be firmly secured to the wall studs.

How To Space Your Wood Screws

When you’re installing furring strips, one of the most important things that you need to keep in mind is how you plan on placing your screws.

Where To Place Your Screws Into The Joists

There are a few different places that you can place your screws into the joists. If the furring strip is long enough and wide enough, then you can place your screws about halfway in from the ends and at even intervals. This will help to keep your furring strip sturdy and secure.

Some people choose to place their screws right in the middle of the furring strip.

Your screws need to be spaced out evenly so that the furring strip stays sturdy. If you’re planning on stapling a layer of drywall, then the screws should all be placed about 4-inches apart. If you’re planning on nailing your drywall though, then you should space them out about 6-inches apart from each other.

what screws to use for furring strips - Picture

If you choose to do this, then make sure that you place two screws right in the middle of the furring strip.

How To Space Your Screws

The screws that you use for your furring strips should be spaced out in a uniform manner. The best way to do this is to start from one end and space them out equally until you reach the other end of the furring strip.

Staggering Your Screws

You can also stagger your screws so that they don’t all line up as much. This is a great way to create a more unique design for your furring strips. You can stagger the screws on each row so that the design is different.

For example, let’s say that you have a 40-inch long furring strip. If you space your screws out at 4-inches, then the first screw will start placed 8-inches from one end. The second screw will be placed at 12-inches, then 16-inches and so on and so forth until you reach the other end of the furring strip.

At this point, the last screw will be placed at 32-inches.

You can stagger your screws based on their heads so that they’re not all in a straight line. The size of your screws also matters a lot when it comes to this portion of the project. You’ll be able to see better what you’re doing if the screws are smaller.

Place your first screw at 8-inches, the second at 12-inches, the third at 8-inches, then finally the last one at 12-inches. This will create a nice staggered design that looks great.

Don’t worry about making everything perfect. The beauty of doing things yourself is that you’re able to create your own unique designs. You don’t have to follow the instructions exactly as long as it’s sturdy enough and looks good to you.

what screws to use for furring strips from our website

This will also help with the design of the strip itself since the heads won’t block as much of the wood.

Where To Place Your Nails

You can also choose to place your nails into the furring strips. This is a great way to save on time or money if you don’t want to use as many nails or screws. It’s really up to you and your preferences as to how you want to place your nails or screws.

How To Place Your First Screw

There are a few different ways that you can start placing your first screw. You can start off either by placing your first screw right in the middle of your furring strip, by placing it in one of the corners, or by placing it somewhere in between.

Some people also opt for placing screws on the outside facing sides of their furring strips. This is a great way to build up the strength of your furring strips so that they won’t bend or warp over time.

The Heads Of The Screws And Nails Should Be Placed Internally

This is something that a lot of people don’t think about.

Where you place your first screw is completely up to you based on what design you’re trying to create. Maybe you want to start off with a corner placed screw in the middle of one of your strips, which would look really nice.

The only thing that you need to remember when placing your first screw is to make sure that it’s sturdy enough. Always place a screw in a corner of your furring strip so that it has more leverage and support. The heads of the nails or screws should always be placed internally.

This is for your own safety since placing them on the outside can sometimes hurt you if you accidentally place your hands somewhere that they shouldn’t be.

It is also a good idea to place the heads of your nails or screws internally so that you don’t get hurt by them later on down the road. You don’t want to accidentally place your hand on a nail that’s sticking out because it could seriously hurt.

what screws to use for furring strips | remodelingmate.com

Always remember that the heads of your screws and nails should be placed internally. You want the design to flow nicely and look its best. Don’t place your screws or nails so that their heads are in areas that people will see.

This isn’t very aesthetically pleasing, and it just looks bad.

How To Add Corners

The corners of your furring strips are also important.

You can always remove the heads of the nails if you’re finding them to be a bit too long for your comfort. This is also a good idea since you don’t want any part of the nails sticking out since they could possibly scratch anything that goes on top of your furring strips, such as carpeting.

You can also opt to buy the plastic caps that cover the nails. These are pretty cheap, and they come in a variety of colors so that they blend in with your furring strips. You’ll just need to drill a hole into the plastic cap to fit the nail though.

It’s all up to you as to what you prefer to use, but these plastic caps are great if you want to save money.

How To Maintain Your Furring Strips

It is also really important to keep your furring strips clean since there will be a lot of dirt, grime and dust that will build up over time.

If you place your furring strips in an area where they’re going to be exposed to a lot of dirt and grime, such as a workshop or a garage, you’re going to want to clean them off every once in a while. You don’t need to do this too often, but maybe every couple of months would be good.

If you place your furring strips in an area where they’re mostly covered, such as the inside of your house or a basement, then you can clean them much less since they won’t be exposed to as much dirt and grime. Maybe once a year would be good enough.

what screws to use for furring strips | remodelingmate.com

You can clean your furring strips using the same kind of cleaners that you use on your floors, or even a mild bleach solution. Using these strong chemicals is okay since the only thing that’s actually touching the furring strip is you, and you’re not going to be eating it.

You never want to use a harsh cleaner on the exposed wood since this can cause irreversible damage.

Storing Your Furring Strips

Once you’re done using your furring strips, you can store them away until you need them again. They can be stored just about anywhere as long as they’re out of the way, and in a place where they’re not going to get damaged.

A shed would be a good place to store them, or even a closet. You just need to make sure that it’s protected from the elements since the wood can warp if it gets wet.

Make sure to keep all of your extra furring strips so that you always have some on hand whenever you need them at a moment’s notice!

This way, you’ll always be ready to start building something new whenever you feel like it.

Purchasing Your Furring Strips

If this is your first time purchasing furring strips, then it’s going to be a bit confusing since there are so many different kinds on the market.

what screws to use for furring strips - remodelingmate.com

You have to decide which ones you actually need since not all furring strips are alike. Some are better than others when it comes to certain situations, and some are going to be easier for you to work with depending on your skill level as a carpenter.

If this is your first time working with furring strips, then we recommend that you purchase the standard 1 by2 inch pine furring strips.

This kind is going to be versatile and good for most purposes, and since you’re a beginner, then you won’t really need anything special.

However, if you know for a fact that you’re going to be using your furring strips to frame the inside of a basement wall that you’re currently working on, then we would recommend that you also purchase the standard 1 by 4 inch pine furring strips. This is going to make your job a lot easier since the strips are bigger, and they’re nice and thick.

Most of the home centers that we went to only had the 1 by 2 inch pine furring strips available, but you can also purchase them online if you have more specific needs.

You can also purchase different kinds of wood to use as furring strips such as redwood, cedar, and even oak if you want to. These are more expensive than the pine varieties, but they also tend to be stronger and more resistant to bugs.

Furring strips can be messy and a slight pain to work with at times, especially for a beginner, so it wouldn’t hurt if you bought a table saw to make your job a little easier.

You can also buy a pneumatic nail gun if you want, but this is only necessary if you’re going to be framing whole rooms with furring strips. A basic air compressor and gun are good enough to get the job done for your purposes.

Sources & references used in this article: