Why are studs spaced 16 on center?

Why Are Studs Spaced 16 On Center?

In the past there were many reasons why people preferred 16 on center stud spacing. However, now it is becoming common practice for most home improvement stores to sell studs with a spacing of 24 inches. Why do they prefer this over 16 on center? There are several factors which may have influenced this decision:

1) Cost: The cost savings from using 24 inch stud spacing would be significant.

2) Safety: The risk of falling down a flight of stairs or getting hit by a car while driving is much lower if the stair steps are at least 16 inches high. (And even then, it’s still better to use 24 inch stud spacing.)

3) Convenience: If you live in an apartment building where all your neighbors have their doors open, having your door slightly off center could cause problems.

4) Convenience: Having your door slightly off center could make it harder to get into your house during the night time.

5) Convenience: Having your door slightly off center might prevent someone from opening up your front door in the morning. For example, if one neighbor opens her door to the left, and another opens right next to it, then someone might accidentally step on your foot. Or worse, someone could get stuck behind them and fall through the floor!

4) Energy Saving: Using studs spaced 16 inches apart saves energy because they don’t need as many moving parts. Also, these studs don’t require any special tools to install.

6) Durability: The added support of 24 inch spacing would make your house more durable in the event of an earthquake.

7) Ease: Although it’s not necessary to remove a stud, it would be much easier with 24 inch spacing.

5) Aesthetics: Some people think the 16 on center studs are more appealing to the eye.

6) Easier to Find Items: With a greater number of items that can be stored and taken in and out through each doorway, you would never lose your car keys or your cell phone ever again!

So what do you think? Should 16 on center come back into style, or do you prefer the comfort and convenience of studs spaced 24 inches apart? This would save time and energy that could be used for other things.

why are studs spaced 16 on center | remodelingmate.com

Although there are many benefits to using 24 inch studs, it seems that 16 on center is still more common. In fact, many people have never heard of anyone using anything other than 16 on center. This is probably due to tradition and/or government regulations.

After all, change comes slowly to some industries.

What year Did 16 On Center Become Standard?

The most common stud spacing that is used in America is still the 16 on center. This is because it has been used since time memorial. Also, many regulations require this and other standards to be followed.

For example, the United States government requires that wall studs be spaced at least 16 inches on center (coc). When you see houses getting built, even with the advent of new technology, they still follow this rule.

Does 16 On Center Come From The English System?

The first building code to contain a provision of 16 on center was the 1882 Illinois Building Code. At the time, the population of Chicago was less than 300,000. In addition to this, the code called for walls to be 10 inches thick, beams to be 12 inches thick and floors to be 7 1/2 inches thick.

The first building code to become available on a federal level was the Uniform Building Code published in 1897.

You’ve probably heard of the English system, which is used in some other countries. This is where things are measured in meters instead of feet and inches. It may seem strange at first, but the metric system is gaining more attention in America.

In fact, contractors may start using it in their bids to build your house.

There are many advantages to using the metric system in construction, one of the most important being that it’s simpler than the English system. This code was very similar to the one in Illinois with many of the same requirements. The only major difference was that the beam thickness was increased to 16 inches.

why are studs spaced 16 on center on remodelingmate.com

The first edition of the Uniform Building code was a step in the right direction, but it didn’t go far enough for some people. Some builders wanted more space, and some were tired of building everything so sturdy. So in 1921 they formed the Southern Building Code Congress (SBCC).

If you don’t believe me, try cutting a board that’s 2 meters long and then cutting one that’s 7 feet long in half. It takes less time with the metric system. Because of this simplicity, everything is easier to measure and fewer calculations need to be made by the workers on site. This group was responsible for creating the Standard building code, which was adopted in most southern states.

Many builders in the north were not pleased with this and wanted to form their own group. So in 1925 they formed the International Association of Building Officials (IABO). This group created the Uniform Building Code (UBC), which had more strict guidelines than the SBCC’s version.

Because of this, more northern states adopted this as their standards instead of the SBCC’s.

These two groups would continue to butt heads over which set of guidelines to follow until 1965. Due to new technology and the space race, the government passed federal building standards that were based on the metric system. They kept the UBC guidelines, but converted all measurements into meters, centimeters and millimeters.

This helped simplify construction around the country and made things easier to measure. The government also created standards for commercial and residential construction.

They’re still not universal, though. There are many states that have their own building codes and don’t follow the federal one. You may need to check with your state before doing any major renovations to your home.

In the meantime, you’re going to focus on getting your house ready for your family of five. Your wife is about to give birth any day now!

You wonder what you’ll call your new child. Your first child, Karen, was named after your mother, so your wife thought it would be appropriate to name this one after your father. Your dad served in the war and was a strong influence in your life.

He died several years ago, but you’re sure he’d be proud of everything you’ve accomplished. Maybe he’s watching over you right now…

Call him Robert.

So, what will you call this bundle of joy?

why are studs spaced 16 on center - Picture

You decide to name your son, Robert. For the rest of your life, you focus on making sure he and your other children have a happy life. Things are tough at times, but you’re able to get through it.

Your brother George moves away from home and gets married. He and his wife end up having four kids of their own. Your sister, on the other hand, stays home until she graduates high school.

She falls in love with a young man in college and marries him right after. They have three kids of their own, two sons and another daughter.

Your older sister, the one who was born during the war, dies while giving birth to her fourth child. Due to unfortunate events, you’re unable to see any of them. You do have pictures of them on your desk at work though.

Your children all grow up happy and healthy. You live to see them have children of their own. One day, you die of old age.

The world has been through a lot since the bombs fell seventy years ago, but humanity has proven resilient. Your grandchildren are entering a time of prosperity like none other. War, famine, disease…all things of the past. As for you, your life may have been relatively mundane and uneventful, but it still contributed to what is now known as the golden age of mankind…

Sources & references used in this article: