Why does my nail gun shoot two nails?

Nail Gun Shooting Two Nails At Once: Why Does My Nail Gun Shoot Two Nails?

The reason why your nail gun shoots two nails at once is because it uses a double feed system. A double feed system means that the nail head is fed into the gun twice before being fired out of the barrel. When using a single feed system, only one shot from the barrel would be used to load each nail.

A double feed system is more efficient than a single feed system since there are less parts to clean and maintain. However, it’s still possible for problems to occur when using a double feed system. You may experience jams or other mechanical issues with your nail gun if you don’t take proper care of it. If you have any questions about how to properly use your nail gun, please feel free to contact us!

Why Does My Nail Gun Shoot Two Nails At Once? When the nail hits the trigger, it will cause the hammer to drop down so that another shot can be fired.

Double Feed System Vs Single Feed System: Which Is Better For Me?

If you are using a single feed system, then when you pull back on the trigger, only one shot will be taken from the barrel. You need to use two shots for each nail.

Using a double feed system will allow you to shoot two nails with just one pull of the trigger. The trade off is that you have more working parts and the potential for jams increases.

DEWALT DC608K 18-Volt Cordless Brushless Double Cut-Off Machine

The DEWALT DC608K is a cordless cut-off tool that can fire up to two nails at a time. This means that with each trigger pull, two nails are discharged. The tool can fire up to 2.5-inch nails depending on the model.

The DEWALT DC608K has a brushless motor that helps to extend the life of the tool and offers more reliability. This cordless cut-off also has integrated LED lights that illuminate the work area. The tool can be used in tight spots due to its slim profile. It can also be used for a variety of jobs such as framing, sheathing, drywall, and house wrap.

The DEWALT DC608K has an adjustable shoe that helps to control the depth of the cut. It also has an adjustable exhaust that helps to prevent loose debris from damaging the tool or getting in your face.

why does my nail gun shoot two nails | remodelingmate.com

This cordless cut-off tool operates with a 18-volt lithium-ion battery, which is sold separately. It is lightweight at just under 5 pounds. It comes with a durable carrying case and a battery charger.

If you’re looking for a powerful cordless cut-off tool that can fire up to 2.5-inch nails, the DEWALT DC608K is an excellent choice.

Nail Gun Troubleshooting: Nail Gun Doesn’t Fire

The first sign that something isn’t working right with your nail gun is that it doesn’t fire. When this happens, you will need to troubleshoot the problem before you can complete your task. The following are some common reasons that could cause your nail gun not to fire:

No nails in the magazine – This is probably the simplest reason why your nail gun isn’t firing. You need to make sure that you have nails loaded in the magazine.

Blocked air filter – Your nail gun’s air filter may become clogged with debris. The gun is unable to fire if the filter is clogged. Use a pin or straightened out paper clip to unclog the filter.

Weak or dead battery – Your nail gun won’t fire if the battery isn’t providing it with enough power. The battery may simply be weak, or it could be completely dead. To determine if the battery is weak or dead, turn the dial on top of the magazine until it reads “null.” This will prevent the weak battery from firing accidentally and causing injury. Then, pull the trigger several times.

If you hear a “click” sound, then the battery still has power. If you don’t hear a click, then the battery is probably weak or dead and should be replaced with a new one. If the battery is completely dead and you still want to use your gun, you will need to connect it to an external power source such as a battery charger or a car battery.

Clogged or dirty air passages – Your nail gun’s air passages can become clogged with dirt or other debris. This can cause your gun to lose power and not fire. Use a compressed air canister to blow out any debris caught in the air passages.

Defective trigger – There may be a defect in your nail gun’s trigger mechanism. The only way to fix this is by replacing the entire trigger.

These are the most common reasons why a nail gun will fail to fire. Other than these issues, there isn’t much you can do to troubleshoot the problem. If you want to rectify the situation, you will need to replace the parts that are causing the problem.

Nail Gun Triggers

why does my nail gun shoot two nails - remodelingmate.com

Triggers are essential components of nail guns. They are mechanisms that you pull in order to fire the gun. Triggers typically have a latch on top that you depress with your index finger in order to fire the gun. They can be made of plastic, metal or a combination of the two materials.

Most triggers are designed to accommodate your entire hand. This ensures that you have a good grip on the trigger at all times. The reason why the trigger needs to accommodate your entire hand is due to the power needed to fire the gun. If the trigger only needed to accommodate your index finger, then you would need a much stronger grip in order for the gun to fire.

Triggers are highly sensitive mechanisms that only need a small amount of pressure in order to fire the gun. Due to this sensitivity, triggers are susceptible to a wide range of problems. The most common problem with a trigger is it becoming clogged with debris.

Debris can enter the trigger while you are using the nail gun. This is especially common if you are working in an area with a lot of dust in the air. This debris can cause the trigger to jam or not function at all. The only way to fix this problem is to unclog the trigger.

The trigger also has many small working parts that can easily come loose from frequent use. The smallest of these parts can get lost while the others jam the trigger. Any of these issues will require you to replace the trigger mechanism. Fortunately, this part is relatively inexpensive and easy to replace.

All you need is the right tools and instructions, and you can complete this task in a matter of minutes.

The first step in replacing your trigger is pushing the trigger forward so that it is completely disengaged from the internal mechanism. This will expose a hexagonal hole on the top of the handle.

The next step is using a hex key to remove the screw in this hole. Place the hex key into the hole and rotate it to the left in a counterclockwise direction until it comes loose.

This should free one side of the trigger. The other side of the trigger is attached with a spring. This spring is under pressure, so there is a risk of the spring snapping if you try to pull the trigger too quickly. One method to avoid this potential problem is to use a flathead screwdriver to GENTLY pry against the spring in order to relieve some of that pressure.

why does my nail gun shoot two nails from our website

You can now reach inside and pull out the rest of the trigger. When you pull out the trigger, the spring and the latch should come out with it. These parts are what caused your nail gun to malfunction in the first place.

You should dispose of these components properly since you will never be using them again.

The next step is to take the replacement trigger, latch and spring and reverse the order of their insertion. When you are finished, the latch should be on the inside of the handle with the small end of the spring around it. The new trigger will be on the outside with an extended tab you can use to pull it back.

You have now completed the assembly of your replacement trigger. All that remains is putting everything back into the gun and testing it out. Follow these instructions backwards to reassemble your nail gun: Insert the top section into the bottom section, paying attention to the placement of the screws. Place the oil canister back into the handle. Reinsert the exhaust filter into its proper place.

Place the rubberized grip back over top of the exhaust filter and place the retaining screws back into their original location.

Pull back the new trigger to release the latch. This should re-engage your mechanism and allow you to fire your gun once again.

Test out the firing mechanism before using your nail gun for its intended purpose; just to make sure you haven’t created any new problems.

Congratulations! You have completed your basic maintenance procedure.

Thanks for using FIX-IT. Feel free to contact us again if you need help with your future repair jobs.

We would also appreciate it if you would take the time to rate our services.

The average rating is usually 4, but if you thought we did an excellent or a terrible job, please let us know ways we can improve upon that.

Oh! Before I forget, if you need parts for your repair job, please visit our website for a list of suppliers in your area. If your city is listed on the site, you can order the part right then and there. If not, just enter the city you need the part shipped to and it will provide a list of suppliers that can ship directly to you.

why does my nail gun shoot two nails - remodelingmate.com

Thanks again, have a good day and remember to give your FIX-IT people a chance.

Sources & references used in this article: