Why is my toilet constantly trickling?

Why Is My Toilet Running?

The first thing that comes to mind when you hear the word “water” is what happens inside your toilet. Water trickles down from the top of the toilet seat and then trickles down through the drain hole. If there are no leaks or clogs in your toilet, it will not run continuously. You may notice that if you have a paper towel roll sitting on top of the toilet, the water will start flowing out slowly once you turn off the water supply.

This is a normal occurrence. When you flush the toilet, water will also push through the tank and enter the bowl. This flushes everything down the drain so that you do not have to worry about it later. So, why is my toilet constantly running? There are several reasons why a toilet may run.

Clogs

There are many reasons why your toilet may be clogged.

What Is A Flapper?

The toilet tank is basically a container that holds water. It has a switch that lets water into the toilet bowl only when it is needed. One of the most common reasons is that people flush non-flushable items down the toilet. This could be napkins, paper towels, or even baby wipes.

This is your float.

Leak

why is my toilet constantly trickling | remodelingmate.com

Over time, your toilet tank can develop a leak. This can be due to several reasons, including old age and wear and tear. Once these items reach the bottom of the toilet bowl, they willprobably clog it completely. The weight of these items keeps them from rising back to the top of the bowl.

A leak can cause your toilet to constantly run.

Overflows

There is also the possibility that your toilet tank may have an overflow. As a result, water is unable to fill the bowl and it will continually run. Overflows are usually caused by faulty or broken parts in the tank that control the amount of water going into the bowl. This can be due to old age and wear and tear.

Faulty Flapper

If your toilet tank has an overflow, then it is most likely due to a faulty or broken flapper. Flappers are designed to fill the tank with enough water to flush everything. If it fails to do this, then the tank will continually run until the flapper is replaced.

Running Water

If you notice that your toilet is constantly running, then there may be an issue with the internal components of the tank. It may be a faulty valve or flapper. This can be determined by inspecting the tank.

A professional can repair the leak and fix the problem so that your toilet doesn’t constantly run.

How to Fix a Running Toilet

A running toilet is one of the most annoying sounds in the world for some. It’s a constant patter of water filling up a tank without stopping. While this is a minor annoyance, it can be fixed easily in most cases.

Before you fix the problem, you have to determine what is causing it. There are several different reasons for a toilet to run.

why is my toilet constantly trickling - Image

Clogs

If your toilet tank is completely full of water, then you probably have a clog somewhere in the toilet pipe. This could be from something simple, like a single napkin, to something more complex, like human waste. Clogs in the pipes will prevent water from fully draining away. The water that is left over will then continuously run into the toilet tank.

Rest assured, this is the easiest problem to fix. If you remove the clog, then the water will drain. You may have to repeat this process several times if you have a major clog. This can be due to something human, such as a turd, or something less disgusting, like a stuffed paper towel.

Running Due to an Overflow

If your toilet tank is completely full of water and there is no clog in the pipes, then you may have an overflow. This means that your tank has a leak or that some faulty piece of equipment is allowing water to flow into the tank.

This usually occurs because of a crack in the tank or a worn out float ball. The float ball is a simple piece that floats on the top of the water in your tank. It regulates how much water is in the tank by stopping the flow when it gets too high.

If your float ball is broken or cracked, then water will flow into the tank endlessly. Replacing the float ball and fixing the crack can solve this problem.

Conclusion

Running toilets can be an annoyance. They are fairly easy to fix, but can be a hassle regardless. Some people may not want to attempt these repairs themselves. If you don’t feel comfortable fixing the problem yourself, then you may want to call a plumber.

Their services will be cheaper than a new toilet or calling someone out at three in the morning because your toilet is running.

You may also wish to do some preventative maintenance if this problem tends to happen often. For example, you could add a napkin into the toilet every time you use it. This will create more bulk and could catch anything that could clog your pipes.

Overall, running toilets are fairly simple problems to fix. Just remember to be careful when working on your toilet. It’s not the most stable object in your home. You don’t want it to fall on you while you’re underneath it.

Remember, don’t plunge it! You’ll only create a bigger mess that way.

Sources & references used in this article: